508435
47
Zoom out
Zoom in
Vorherige Seite
1/57
Nächste Seite
45
ENGLISH
The baud rate cannot be set using the
Change Baud Rate Wizard or the
Brother printer utilities.
Error 99: The computer cannot detect the printer.
- Make sure that the printer is turned on.
- Make sure that the interface cable is connected correctly.
- Make sure that the COM port where the printer is connected
is the same COM port selected in the Change Baud Rate
Wizard. (Many computers have more than one COM port
and COM2 may have been mistakenly selected in the
Change Baud Rate Wizard.)
Error 1 or Error 5: The serial port of the computer cannot
be used.
When another serial connection device is using the same
COM port, labels cannot be printed. Change the COM
port for the serial connection device or connect the printer
to a COM port that is not being used.
I want to reset the printer/delete the
data transferred from computer.
To reset the printer, press and hold the power button to turn
off the printer. Then, hold down the power button for two
seconds. Continue holding down the power button, and press
the Feed/Cut button six times. The printer will then reset. All
the transferred data from the computer will be deleted and all
printer settings will be reset to the factory settings.
I want to cancel the current printing job.
Make sure that the printer is on, and then briefly press the
power button on the front of the printer.
Data cannot be sent from a device
plugged into the USB Direct Interface
on the front of the printer, or
a
connected device cannot be used
(PT-9800PCN only).
The connected device is incompatible with the
PT-9800PCN.
If the LED display on USB Direct Interface is flashing in
red, either the device is incompatible with the printer or
the device consumes too much power. In either case,
the
device cannot be used with the PT-9800PCN.
The buffer of the PT-9800PCN is full.
If the LED flashes in red while connected devices are
being used, the buffer of the PT-9800PCN may have
become full. Stop the data transmission, wait until the
data buffered in the PT-9800PCN has been processed,
and then unplug the device and plug it in again.
An error occurred during installation.
Installation cannot be performed
with the CD-ROM.
Visit http://solutions.brother.com/
I would like more information about
the Add-Ins.
I do not understand how to connect
to a database.
See the “Software User’s Guide (PDF).
Problem Solution
47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Brother P-touch 9700PC wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Brother P-touch 9700PC

Brother P-touch 9700PC Bedienungsanleitung - Deutsch, Englisch, Holländisch - 58 seiten

Brother P-touch 9700PC Bedienungsanleitung - Holländisch - 59 seiten

Brother P-touch 9700PC Bedienungsanleitung - Französisch, Italienisch, Spanisch - 58 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info