Bedienungsanleitung Brother P-touch 9800PCN (Seite 39 von 57) (Englisch)

508436

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

ENGLISH

■ Bar code printing

A bar code scanned with the bar code

reader can be printed with the protocol and

size from a previously created template.

Transfer the template to be printed

from the P-touch Editor 5.0 to the

printer by using the Transfer Manager.

(See Software User´s Guide.)

When data is transferred to

“Configurations” in Transfer

Manager, the “Key Assign” number

is automatically specified.

Scan the “P-touch template command”

bar code to begin specifying the print

settings.

Refer to “List of bar codes for specifying

settings” (→ P. 49).

Specify the print settings by scanning

the bar codes with the desired settings,

from the “Basic Settings” bar codes.

Scan the “Select template” bar code,

and then scan the bar codes under

“For entering numbers” to specify the

“Key Assign” number (three digits)

for the bar code template.

Note

● For details on the various settings that

can be chosen by scanning the

appropriate bar code, refer to

“List of bar

codes for specifying settings” (→ P. 49).

● If the bar code to be scanned with the

bar code reader has a different protocol

than the bar code in the previously

created template, it may not be possible

to create and print the bar code.

Note

● Be sure to create bar code templates

that comply with the limits on the size

and number of digits for the bar code to

be scanned. The new bar code cannot

be created if it exceeds the number of

digits specified in the template.

(CODE128/9-digit/69 mm × 17 mm)

Note

● It is possible to scan multiple settings.

● If no settings have been specified, a label

will be printed with the default P-touch

Template Setting (Single copy with “Auto

cut on” and “Half cut on”). For

details on

P-touch Template Settings, download

“P-touch Template manual” (English only)

from the following web site:

http://solutions.brother.com/

Choose your region (eg. Europe), your

country, your model and Downloads for

your model.

● To specify the number of copies to be

printed, scan the “Number of copies”

bar

code, and then scan the bar codes

under “For entering numbers” to specify

a three-digit number. The setting is

automatically applied when three digits

have been specified.

Example:

Specify numbers by scanning bar codes

as follows: 7

→ [00][7], 15 → [0][1][5].

● To change the setting for the number of

copies, scan the “Number of copies” bar

code again, and then scan the bar codes

for the new three-digit number.

Note

● The setting is automatically applied

when three digits have been specified.

Example:

Specify numbers by scanning bar codes

as follows: 7

→ [00][7], 15 → [0][1][5].

● To change the number, scan the “Select

template” bar code again, and then scan

the bar codes for the new three-digit

number.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother P-touch 9800PCN Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother P-touch 9800PCN

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info