Bedienungsanleitung Brother PeDesign Next (Seite 183 von 320) (Englisch)

555865

183

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

181

Transferring Data

Using the Link Function to Embroider From the Computer

■ Changing the embroidery

machine name appearing with the

Link function

1. Click Machine Name in the Option menu of

the queue whose name is to be changed.

2. Type the name in the Machine Name box,

and then click OK.

b Memo:

• The embroidering order of designs in the

queue can be changed.

For details, refer to “If multiple

designs were sent to a single

machine” on page 179.

• If additional machines are connected while

the

Link

dialog box is displayed,

corresponding queues will appear. If a

machine is disconnected, the

corresponding queue will disappear.

• To display the

Property

dialog box for a file,

double-click the file’s icon, or click a file to

select it, right-click it, and then click

Property

from the menu that appears.

• To reduce this dialog box to a button on the

taskbar, click the

Minimize

button.

To disconnect the USB cable, or shut

down the computer

• After data transferring to embroidery

machine and the

transferring

message on

the screen of the machine is closed, you

can disconnect the USB cable, or shut

down the computer.

When connected to the embroidery

machine again, you can continue the Link

operation.

• The embroidery machine can finish sewing

the design currently being embroidered

even if the computer is turned off.

• If the embroidery machine is turned off

while it is embroidering, the resume

operation can be used the next time it is

turned on. At that time, transmission can be

resumed using the Link function by clicking

Link

in Design Database or in the

Option

menu of Layout & Editing to display the

Link

dialog box.

• If the embroidery machine connection

cannot be detected, the

Link

dialog box will

close automatically.

• To display the

Link

dialog box again after

the computer has been restarted, click

Link

in Design Database or in the

Option

(in the upper-right corner) of Layout &

Editing.

• To display the

Distributor

dialog box, click

Distributor

in the

Option

menu of the

Link

dialog box.

b Memo:

A name (up to 10 alphanumeric characters/

symbols) can be specified for the embroidery

machine.

a Note:

• When an embroidery machine is

connected to the computer, the

embroidery machine is recognized by the

computer as a removable disk and is

assigned a drive letter. If this drive letter

is the same as one that has already been

assigned by the computer, designs

cannot be sent from the computer to that

embroidery machine. This problem

occurs, for example, if a network drive

has been assigned a computer drive

letter. If this occurs, cancel the

assignment for the drive with the

conflicting drive letter.

• When the number of embroidery

machines connected to the computer via

USB is increased, the operating system

may require that the computer be

restarted. At that time, restart the

computer.

XE8656-001.book Page 181 Monday, May 24, 2010 5:44 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother PeDesign Next Seite 183

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother PeDesign Next

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info