718903
19
Zoom out
Zoom in
Vorherige Seite
1/75
Nächste Seite
Setting Up the Printer
15
1
f When the WIRELESS LAN indicator
stops blinking and remains lit, the printer
is connected. Print from the printing
software created with the SDK.
NOTE
It may take more than 1 minute to
establish a wireless LAN connection.
Since it differs depending on the device
and environment, check with the device
manufacturer.
If printing is not possible
In the following cases, the wireless LAN
connection between the printer and iOS
device will be cut, preventing printing.
1 The iOS device has entered sleep
mode.
2 The printer has been turned off.
3 The printer has been switched to
USB mode.
For the cases mentioned above, perform
the operations below to re-establish the
connection.
1 Select the SSID for the ad-hoc mode
for step e on page 14.
2 Select the connection for step a on
page 14.
3 Hold down the (Power) button for
at least 3 seconds to enter wireless
LAN mode, and then select the SSID
for the ad-hoc mode for step c on
page 14.
Connecting the Printer
and a Windows
®
Computer
1
Printing From a Windows
®
Computer Via a Wireless LAN
Connection 1
NOTE
This printer can establish a connection
with the “Open System” authentication
method and when the encryption method
is set to “None” or the “WEP” ad-hoc
mode.
The printer settings will be specified when
the printer driver is installed on the
Windows
®
computer. Prepare the
computer and the USB cable.
Log on with administrator rights.
If, while specifying the settings, a dialog
box appears requesting administrator
rights, or requesting confirmation to
perform the operation with administrator
rights, follow the instructions.
If, while specifying the settings, a dialog
box appears requesting confirmation to
continue the installation, continue it.
The descriptions in this manual apply to
wireless LAN connections that can be
set up using procedures for a standard
operating system. For any other cases,
refer to the instruction manual included
with your wireless LAN adapter or
Windows
®
Computer.
If a firewall is being used, the installation
may not be completed correctly. Open
TCP/IP port number 9100. If you are
unsure of how to perform the operation,
check with the administrator who originally
specified the settings.
Before the installation, disconnect the
LAN cable from the computer or disable
the wired LAN connection.
19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Brother PJ-673 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Brother PJ-673

Brother PJ-673 Bedienungsanleitung - Deutsch - 76 seiten

Brother PJ-673 Bedienungsanleitung - Holländisch - 75 seiten

Brother PJ-673 Bedienungsanleitung - Französisch - 81 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info