Bedienungsanleitung Brother PR-1000 (Seite 51 von 318) (Englisch)

463771

Zoom out

Zoom in

Vorherige Seite

1/318

Nächste Seite

Hooping the Fabric in the Embroidery Frame 49

——

—————————————————————————————————————————————————————————————

—

—————————————————————

7. Hooping the Fabric in the Embroidery Frame

After selecting the pattern to be embroidered, check which embroidery frames can be used to sew the

pattern. Select the appropriate frame, and hoop the fabric and stabilizer in the embroidery frame.

(Refer to “Attaching Iron-On Stabilizer (Backing) to Fabric” on page 93.) For precautions concerning the

fabric, refer to page 36.

Note

●

If the fabric is not taut, the pattern may be misaligned or the fabric may pucker. Follow the procedure

described below to firmly stretch the fabric in the embroidery frame so that the fabric is not loose. In

addition, be sure to work on a level surface when putting the fabric in the embroidery frame.

Hooping the fabric in the

embroidery frame

Select an embroidery frame.

From the sizes of embroidery frames

indicated in the screen, select the embroidery

frame that you wish to use.

Embroidery frames that can be used appear

lighter ( ) embroidery frames that

cannot be used appear darker ( ).

Memo

● If the embroidery frame holder is not

attached to the machine, the embroidering

area will not display the correct frame

size. (Refer to page 51.)

■ Embroidery frame types

There are four sizes of embroidery frames

included with this machine, which are used with

the included embroidery frame holder A. For

details on the uses for each frame, refer to

“Correctly Using the Embroidery Frames” on

page 90.

If you use the optional embroidery frames (quilt,

border and jumbo) with the included embroidery

frame holder B, following icons appear in the

screen; . If you use the optional round

frame with the optional embroidery frame holder

C, following icons appear in the screen; .

CAUTION

Note

● The embroidery frame indicators show all

embroidery frame sizes in which the

embroidery pattern can be sewn. Be sure

to use an embroidery frame of the most

suitable size. If the embroidery frame that

is too large is used, the pattern may be

misaligned or the fabric may pucker.

(Refer to “Correctly Using the Embroidery

Frames” on page 90.)

Icon Name

Embroidering area

Extra-large embroidery frame

200 mm (H) × 360 mm (W)

(7-7/8 inches (H) × 14 inches (W))

Extra-large embroidery frame

(optional)

200 mm (H) × 300 mm (W)

(7-7/8 inches (H) × 11-3/4 inches (W))

Large embroidery frame

130 mm (H) × 180 mm (W)

(5-1/8 inches (H) × 7-1/8 inches (W))

Medium embroidery frame

100 mm (H) × 100 mm (W)

(4 inches (H) × 4 inches (W))

Small embroidery frame

40 mm (H) × 60 mm (W)

(1-1/2 inches (H) × 2-3/8 inches (W))

●

If embroidery frames other than the

four included frames or recommended

optional frames are used, the

embroidery frame may hit the presser

foot and damage the machine, or cause

injury to the user. (See “Correctly

Using the Embroidery Frames” on

page 90 for the details about the

embroidery frames.)

Icon Name

Embroidering area

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother PR-1000 Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother PR-1000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info