Bedienungsanleitung Brother PR-1000 (Seite 252 von 318) (Englisch)

463771

252

Zoom out

Zoom in

Vorherige Seite

1/318

Nächste Seite

APPENDIX ——————————————————————————————————————————————————————————————————————————

——

250

Fabric/stabilizer compatibility chart

Note

● Due to the wide variety of fabrics and stabilizers available, the above information should be used as

guideline only. If unsure of a particular fabric/stabilizer combination, please sew test a sample prior

to the finished garment.

Fabric/

Garment

No. of Backing

Pieces

No. of Topping

Pieces

Comments

Terry cloth 1 tear-away 1 water-soluble

Increase density and/or satin stitch width. Fine

details and small lettering tend to get caught in the

terry loops.

Satin jacket

Heavy lining:

None

Light or no

lining: 1 tear-

away

None

If garment slips in frame, causing alignment

problems, wrap inner frame with masking tape or

fabric bias tape. This provides a rough surface to

grip garment and also helps minimize frame burn.

Cotton

sheeting

1 tear-away None

High-density or highly detailed designs may require

more backing. If so, use two pieces of lightweight

backing instead of one piece of heavy backing.

Denim 1 tear-away None

Reduce speed if needle begins to heat up and the

thread breaks.

Headwear Optional Optional

Change needles more often than usual because the

buckram backing dulls needles faster. A lightweight

tear-away backing helps reduce thread breaks and

regulates thread tension. Use a topping on corduroy

or foam cap fronts.

Dress shirt

(woven)

1 tear-away None

High-density or highly detailed designs may require

more backing. If so, use two pieces of lightweight

backing instead of one piece of heavy backing.

Golf shirt 1 cut-away Optional

Use topping for designs containing small lettering

or a lot of detail, and also for piqué knits.

Canton fleece 1 tear-away Optional

Use a topping if the garment has a textured surface,

such as a basketweave or pronounced twill.

Canvas 1 tear-away None Frame tightly.

Corduroy 1 tear-away 1 water-soluble

A higher stitch density or more understitches, as

well as a topping, may be necessary to prevent

stitches from sinking into the fabric.

Lingerie or

silk

1 or 2

lightweight

tear-away

Optional

Reduce sewing speed. The thread tension should be

low. Use topping for designs with high detail or

small lettering. For very fine fabrics, use a thinner

thread. Avoid extremely narrow satin stitching on

letters or details; instead increase satin stitch width

or use a bean stitch. Gently remove (don’t pull)

backing and topping from garment.

Sweater knit

1 cut-away or

adhesive tear-

away

1 water-soluble

Use tightly woven organza or curtain fabric in a

matching color as a backing for bulky or “holey”

knits.

Sweatshirt

1 cut-away or

adhesive tear-

away

Optional

Highly detailed designs may require two layers of

lightweight cut-away stabilizer. Use a topping on

extra-thick fabrics or with fine-detail designs.

T-shirt

1 light-weight

cut-away or

adhesive tear-

away

Optional

Use a topping on designs with fine detail or small

lettering. Tensions should be light. Avoid stitch-

heavy designs.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother PR-1000 Seite 252

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother PR-1000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info