Bedienungsanleitung Brother PR-600C (Seite 11 von 229) (Englisch)

618165

Zoom out

Zoom in

Vorherige Seite

1/229

Nächste Seite

——————————————————————————————————————————————————————————————

—

Not all six needles can be used to sew at the same

time. Only one needle is moved to the embroidering

position at a time. According to the sewing order, the

needle bar case is moved to the left and right so that

the needle bar and needle thread with the required

color can be moved to the embroidering position.

1 Needle at the embroidering position

The needle is positioned over the hole in the

needle plate 2.

When starting the machine, the presser foot is

automatically lowered, and the embroidery is sewn

while performing pulling thread from the materials at

the thread trimming and while changing thread

colors (moving the needle to be sewn within the

embroidering). When sewing is finished, the

machine stops. If the pattern uses seven or more

thread colors, the machine will stop when it is

necessary for the thread spools to be changed, and

the corresponding instructions appear on the LCD.

Differences with single-needle

machines

■ Can sew embroidery patterns using six or less

colors without the need to replace the thread

spools

With single-needle machines, the thread spool

must be changed and the machine must be

threaded each time a different thread color is

used. With this machine, it is not necessary to

change the thread spool or rethread the machine

with embroidery patterns containing six or less

colors. If total colors are less than 6 colors, and if

total color change is more than 7 times, machine

will come back to the needle that the machine is

already used and sew the same color again

automatically.

■ Automatic sewing reduces sewing time

Except to change the thread spools with patterns

containing seven or more colors, once the

machine is started, it continues to operate

automatically, from lowering the presser foot to

performing the specified operations at the starting

and end positions in addition to changing the

thread colors. Since the machine can change

threads and finish stitching, sewing time is

reduced.

■ Automatically pulls and holds the thread tails to

the under side of fabric at the beginning and end

of stitching

Since the machine automatically pulls the upper

thread under the fabric at the beginning of a

color, and pulls the upper thread from the fabric

at the time of thread trimming, you don’t need to

deal with the upper thread tail at all.

■ Automatically moves the embroidery frame to

the embroidering position

With single-needle machine, in most cases, the

embroidery pattern is centered in the frame and

the fabric must be correctly positioned within the

embroidery frame with the center of the desired

embroidering position aligned with the center of

the embroidery frame. However, with this

machine, the embroidery frame is moved to

determine the embroidering position, making it

easier to sew the pattern at any place in the frame.

In addition, the embroidering position can be

freely determined after the fabric is hooped and

the embroidery frame is attached to the machine,

regardless of how the fabric is positioned in the

embroidery frame.

Sapphire.book Page x Friday, August 1, 2003 9:12 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother PR-600C Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother PR-600C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info