Bedienungsanleitung Brother PR-670E (Seite 181 von 244) (Englisch)

718890

181

Zoom out

Zoom in

Vorherige Seite

1/244

Nächste Seite

BASIC SETTINGS AND HELP FEATURE

179

■ Page 5

I Link function

Set the Link function on or off. (Refer to page 142)

J Manual Color Sequence

Set the “Manual Color Sequence” on or off. (Refer

to page 108)

K Thread Sensor

Set “Thread Sensor” to either “ON” or “OFF”.

If thread sensor is set to “OFF”, the machine does

not stop until embroidering is finished, even if the

thread breaks or there is no more thread in the

bobbin. Set thread sensor to “ON”, except when it

is necessary to set it to “OFF”.

When the machine is purchased, “ON” is selected.

L Mouse Pointer

The shape can be selected for the pointer that

appears when a USB mouse is connected.

Depending upon the background color, select the

desired shape from the three that are available.

When the embroidery machine is purchased,

is selected.

* The setting remains selected even if the machine

is turned off.

M Units of Measure

The units of measurements can be set to

millimeters or inches.

When the embroidery machine is purchased,

“mm” is selected.

N Brightness of the Screen Display

The brightness of the screen display can be

adjusted.

The screen will appear dimmer if the number on

the settings screen decreases. The screen will

appear brighter as the number increases.

When the embroidery machine is purchased, “4” is

selected.

O LANGUAGES

The language setting can be specified.

■ Page 6

P The Total Count counter shows the total number

of stitches sewn, and the Trip Count counter show

the number of stitches that have been sewn since

the machine’s last maintenance.

Q The Total Time counter shows the total amount of

time that the machine has been used, and the Trip

Time counter shows the amount of time that the

machine has been used since its last

maintenance.

*Use counters P and Q as a standard for

performing periodic maintenance and for receiving

maintenance for the machine.

R The “No. ##” is the number for the embroidery

machine.

S Version

Shows the version of the software installed on this

embroidery machine. (Refer to page 231.)

Details of each of the settings are described in the

following sections. After specifying the desired

settings, touch to return to the screen that

was displayed before the settings screen was

displayed.

Note

• Normally, set thread sensor to “ON”.

When thread sensor is set to “OFF”, the

machine will not be able to detect if the

upper thread has become tangled.

Continuing to use the machine with tangled

thread may cause damage.

Note

• Check with your local authorized Brother

dealer or at “ http://s.brother/cpbac ” for

details on available updates.

Note

• Some settings cannot be changed while

sewing.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother PR-670E Seite 181

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother PR-670E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info