Bedienungsanleitung Brother PR-670E (Seite 206 von 244) (Englisch)

718890

206

Zoom out

Zoom in

Vorherige Seite

1/244

Nächste Seite

204

Fabric/stabilizer compatibility chart

Fabric/

Garment

No. of Backing

Pieces

No. of Topping

Pieces

Comments

Terry cloth 1 tear-away 1 water-soluble

Increase density and/or satin stitch width. Fine details and small

lettering tend to get caught in the terry loops.

Satin jacket

Heavy lining:

None

Light or no lining:

1 tear-away

None

If garment slips in frame, causing alignment problems, wrap

inner frame with masking tape or fabric bias tape. This provides

a rough surface to grip garment and also helps minimize frame

burn.

Cotton sheeting 1 tear-away None

High-density or highly detailed designs may require more

backing. If so, use two pieces of lightweight backing instead of

one piece of heavy backing.

Denim 1 tear-away None Reduce speed if needle begins to heat up and the thread breaks.

Headwear Optional Optional

Change needles more often than usual because the buckram

backing dulls needles faster. A lightweight tear-away backing

helps reduce thread breaks and regulates thread tension. Use a

topping on corduroy or foam cap fronts.

Dress shirt

(woven)

1 tear-away None

High-density or highly detailed designs may require more

backing. If so, use two pieces of lightweight backing instead of

one piece of heavy backing.

Golf shirt 1 cut-away Optional

Use topping for designs containing small lettering or a lot of

detail, and also for piqué knits.

Canton fleece 1 tear-away Optional

Use a topping if the garment has a textured surface, such as a

basketweave or pronounced twill.

Canvas 1 tear-away None Frame tightly.

Corduroy 1 tear-away 1 water-soluble

A higher stitch density or more understitches, as well as a

topping, may be necessary to prevent stitches from sinking into

the fabric.

Lingerie or silk

1 or 2 lightweight

tear-away

Optional

Reduce sewing speed. The thread tension should be low. Use

topping for designs with high detail or small lettering. For very

fine fabrics, use a thinner thread. Avoid extremely narrow satin

stitching on letters or details; instead increase satin stitch width

or use a bean stitch. Gently remove (don’t pull) backing and

topping from garment.

Sweater knit

1 cut-away or

adhesive tear-

away

1 water-soluble

Use tightly woven organza or curtain fabric in a matching color

as a backing for bulky or “holey” knits.

Sweatshirt

1 cut-away or

adhesive tear-

away

Optional

Highly detailed designs may require two layers of lightweight

cut-away stabilizer. Use a topping on extra-thick fabrics or with

fine-detail designs.

T-shirt

1 light-weight

cut-away or

adhesive tear-

away

Optional

Use a topping on designs with fine detail or small lettering.

Tensions should be light. Avoid stitch-heavy designs.

Note

• Due to the wide variety of fabrics and stabilizers available, the above information should be used as

guideline only. If unsure of a particular fabric/stabilizer combination, please sew test a sample prior to

the finished garment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother PR-670E Seite 206

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother PR-670E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info