Bedienungsanleitung Brother PR655 (Seite 11 von 280) (Englisch)

618170

Zoom out

Zoom in

Vorherige Seite

1/280

Nächste Seite

Machine Structure and Features 9

——

———————————————————————————————————————————

—

———————————————————————————————————————

Not all six needles can be used to sew at the same

time. Only one needle is moved to the

embroidering position at a time. According to the

sewing order, the needle bar case is moved to the

left and right so that the needle bar and needle

thread with the required color can be moved to the

embroidering position.

1 Needle at the embroidering position

The needle is positioned over the hole in the

needle plate 2.

When starting the machine, the presser foot is

automatically lowered. The embroidery is sewn

and thread is pulled away from the material when

thread trimming and when changing thread colors

(moving to the different needles to be sewn within

the embroidery). When sewing is finished, the

machine stops. If the pattern uses seven or more

thread colors, the machine will stop when it is

necessary for the thread spools to be changed, and

the corresponding instructions appear on the LCD.

Differences with single-needle

machines

■ Can sew embroidery patterns using six or less

colors without the need to replace the thread

spools

With single-needle machines, the thread spool

must be changed and the machine must be

threaded each time a different thread color is

used. With this machine, it is not necessary to

change the thread spool or rethread the machine

with embroidery patterns containing six or less

colors. If total colors are less than 6 colors, and

if total color change is more than 7 times,

machine will come back to the needle that the

machine is already used and sew the same color

again automatically.

■ Automatic sewing reduces sewing time

Except to change the thread spools with patterns

containing seven or more colors, once the

machine is started, it continues to operate

automatically, from lowering the presser foot to

performing the specified operations at the

starting and end positions in addition to

changing the thread colors. Since the machine

can change threads and finish stitching, sewing

time is reduced.

■ Automatically pulls and holds the thread tails to

the under side of fabric at the beginning and

end of stitching

Since the machine automatically pulls the upper

thread under the fabric at the beginning of a

color, and pulls the upper thread from the fabric

at the time of thread trimming, you don’t need to

deal with the upper thread tail at all.

■ Automatically moves the embroidery frame to

the embroidering position

With a single-needle machine, in most cases,

the embroidery pattern is centered in the frame

and the fabric must be correctly positioned

within the embroidery frame with the center of

the desired embroidering position aligned with

the center of the embroidery frame. However,

with this machine, the embroidery frame is

moved to determine the embroidering position,

making it easier to sew the pattern at any place

in the frame. In addition, the embroidering

position can be freely determined after the fabric

is hooped and the embroidery frame is attached

to the machine, regardless of how the fabric is

positioned in the embroidery frame.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother PR655 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother PR655

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info