Bedienungsanleitung Brother QL-650TD (Seite 11 von 50) (Englisch)

579536

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

Introduction

Maintenance and

Troubleshooting

STEP

Before using the printer

Using only this printer (No PC)

• Scratching the printed surface of the label with your finger nails or metal objects, or

touching the printed surface with hands dampened by water, sweat, or medicated cream,

etc., can cause the colour to change or fade.

• Do not apply labels to any persons, animals, or plants.

• As the end of the DK Roll is designed to not adhere to the label spool, the last label may

not be cut properly. If this happens, remove the remaining labels, insert a new DK Roll,

and reprint the last label.

Note: To account for this, the number of DK Labels included on each DK Roll may be

more than indicated on the package.

• When peeling a DK Label, some portion of the label may remain. Remove the remaining

portion before attaching a new label.

• Some DK Rolls use permanent adhesive for their labels. These labels cannot be easily

peeled off once attached.

• Prior to using CD/DVD labels, be sure to follow the instructions in your CD/DVD player's

instruction manual regarding applying CD/DVD labels.

• Do not use CD/DVD labels in a slot loading CD/DVD player, for example a CD player in

a car where the CD is slid into a slot in the CD player.

• Do not peel off the CD/DVD label once it is applied to the CD/DVD, a thin surface layer

may come off, resulting in damage to the disk.

• Do not apply CD/DVD labels to CD/DVD disks designed for use with ink jet printers.

Labels peel off these disks easily and using disks with peeled labels can result in loss or

damage of data.

• When applying CD/DVD labels, use the applicator included with the CD/DVD label rolls.

failure to do so could cause damage to the CD/DVD player.

• User's shall take full responsibility for applying CD/DVD labels. Brother accepts no

responsibility for any loss or damage of data caused by the inappropriate use of CD/DVD

labels.

CD-ROM and Software

• Do not scratch or subject the CD-ROM to high or low temperatures.

• Do not put heavy objects on the CD-ROM or apply force to the CD-ROM.

• The software contained on the CD-ROM is meant for use with the printer only. See

License on CD for further details. This software may be installed on multiple personal

computers for use in an office, etc.

Battery

• Do not use the battery in any other products.

• Dispose of a used battery in accordance with all applicable

federal, state, and local regulations.

• When storing or discarding the battery, wrap it with

adhesive cellophane tape or similar material to prevent

short circuit of the battery.

• It is recommended to replace the battery every two years.

Adhesive cellophane tape etc.

Battery

Example of grounding of battery

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother QL-650TD Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother QL-650TD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info