Bedienungsanleitung Brother QL720 (Seite 6 von 38) (Englisch)

579458

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

Do not use the machine with foreign

objects in it. Do not drop any metal objects

such as paper clips and staples into the

machine. If water or any foreign objects

should enter the machine, unplug the

power cord from the electric outlet and

remove the foreign object. If necessary,

contact the retail outlet where the machine

was purchased or your local authorised

service centre.

Do not allow organic solvents (benzene,

paint thinner, nail polish remover,

deodoriser, etc.) to come into contact with

the machine and its connecting cables.

Doing so may cause the equipment to

deform or dissolve, and there may be a risk

of electrical shock or fire.

Do not touch the machine during a severe

thunderstorm, as this may result in

electrical shock.

Make sure to turn off the machine and

remove the power cord from the electrical

outlet when cleaning the machine. Failure

to do so could cause an electrical shock or

fire.

To avoid possible fire or electrical shock,

never disassemble the machine or allow it

to get wet.

Do not use paint thinner, benzene, alcohol

or any other organic solvents to clean the

machine. Doing so may cause damage to

the surface finish. Use a soft, dry cloth to

clean the machine.

Do not put any heavy objects or objects

containing water on top of the machine.

If water or any foreign object enters the

machine, contact the retail outlet where

the machine was purchased or your local

authorised service centre. If you continue

to use the machine with water or a foreign

object in the machine, the machine may be

damaged or personal injury could result.

Follow these guidelines to avoid fire, electric shock, or other damage.

Power Cord

Use only the authorised power source

(220 - 240V AC) for the machine.

Use only the power cord included with the

machine.

Do not handle the power cord or plug if

your hands are wet.

Do not overload the electrical outlet with

too many appliances or plug the power

cord into a damaged electrical outlet.

Do not cut, damage, alter or place heavy

objects on the power cord.

Regularly remove the power plug from

the electrical outlet, and clean the base of

the pins and between the pins. If you leave

the power plug in the electrical outlet

for an extended period of time, dust will

accumulate at the base of the power plug

pins. This could cause a short circuit that

may result in a fire.

Do not use the power cord if it is damaged.

Ensure the power cord is correctly inserted

into the electrical outlet.

Do not pull the power cord when removing

the power plug from the electrical outlet.

Doing so could cause an electrical shock

or fire.

Do not bend, break or damage the cord in

any way, as it may result in an electrical

shock, fire or a machine malfunction.

Do not use an extension cord, as this may

result in a fire, electrical shock, or damage

to the machine.

WARNING

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother QL720 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother QL720

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info