Bedienungsanleitung Brother RS-240 (Seite 25 von 68) (Englisch)

631337

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Sewing with a twin needle

We have designed your machine so you can sew with this needle and two top threads. You can use the same

color or two different colors of thread for making decorative stitches.

For details on the stitches that can be sewn with the twin needle, refer to “Stitch settings” (page 52).

■ Twin needle threading

Attach the twin needle.

Attach the twin needle in the same way as a

single needle (page 21).

Attach the extra spool pin.

Put the extra spool pin in the hole on the top of

the machine. Put the second spool of thread

onto the extra spool pin.

a First spool

b Second spool

Use the thread from the first spool to thread

the machine to the needle bar thread guide.

The path for threading the machine to the

needle bar thread guide is the same as for

normally threading the machine (for a single

needle). See page 17 for more details.

Thread the left needle from front to back.

Use the thread from the second spool to thread

the machine to the thread take-up lever.

The path for threading the machine to the

thread take-up lever is the same as for normally

threading the machine (for a single needle).

See page 17 for more details.

Thread the right needle from front to back.

Do not pass the thread behind the needle bar

thread guide.

a Left needle thread passes through the needle bar

thread guide.

b Right needle thread passes in front of the needle

bar thread guide.

c Needle bar thread guide

Note

Models equipped with a needle threader

● You cannot use the needle threader to

thread the twin needle. Instead, thread the

twin needle by hand, from front to back.

Using the needle threader may damage the

machine.

● Use only twin needles that have been made for this machine (part code: 131096-121). Other needles

could break, and damage the machine.

● Do not sew with bent needles. The needle could break and injure you.

● You can not use the needle threader to thread the twin needle. Instead, thread the twin needle by hand,

from front to back. Using the needle threader may damage the machine.

● When using the twin needle, be sure to select an appropriate stitch, otherwise the needle may break or

the machine may be damaged.

● Select a stitch width of 5.0 mm (3/16 inch) or less, otherwise the needle may break or the machine may

be damaged.

● After adjusting the stitch width, slowly turn the handwheel toward you (counterclockwise) and check that

the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break.

● When using the twin needle, be sure to attach zigzag foot “J”, otherwise the needle may break or the

machine may be damaged.

● When changing the sewing direction, be sure to raise the needle before turning the fabric. If the fabric is

turned while the needle is lowered, the needle may bend or break.

CAUTION

● When using the twin needle, be sure to attach

zigzag foot “J”, otherwise the needle may

break or the machine may be damaged.

CAUTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother RS-240 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother RS-240

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info