631329
8
Zoom out
Zoom in
Vorherige Seite
1/46
Nächste Seite
7
Note
When leaving the machine unattended, the
main switch of the machine should be
switched off or the plug must be removed
from the socket outlet.
When servicing the machine, removing
covers or changing bulbs, the machine must
be unplugged.
(For U.S.A. only)
This appliance has a polarized plug (one
blade wider than the other). To reduce the
risk of electric shock, this plug is intended
to fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet,
reverse the plug.
If it still does not fit, contact a qualified
electrician to install the proper outlet. Do
not modify the plug in any way.
Main Power/Sewing
Light Switch
This switch turns the main power and sewing light
on or off.
1 Turn on (toward the “I” mark)
2 Turn off (toward the “O” mark)
Foot Controller
When you press the foot controller down lightly, the
machine will run at a low speed. When you press
harder, the machine’s speed will increase. When you
take your foot off the foot controller, the machine
will stop. You should make sure that nothing is
placed on the foot controller when the machine is
not in use.
Note
(For U.S.A. only)
Foot Controller: Model KD-1902
This foot controller can be used with
Models XL-5500/XL-5600/XL-5700/
XL-5510/XL-5610/XL-5710/PS-21.
.
Inserting the Needle
1
Remove the power supply plug from the
electrical outlet.
1
2
Do not allow pieces of cloth and dust to
build up on the foot controller, otherwise
a fire or an electric shock could occur.
Turn the main power switch off before
you change the needle. If you leave the
main power on and step on the foot
controller, the machine will start and you
may be injured.
Only use sewing-machine needles for
home use. Other needles may bend or
break and cause injury.
Never sew with a bent needle. A bent
needle will easily break and cause injury.
CAUTION
CAUTION
XL5000us.book Page 7 Tuesday, October 28, 2003 11:01 AM
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Brother RS-25 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Brother RS-25

Brother RS-25 Bedienungsanleitung - Deutsch - 46 seiten

Brother RS-25 Bedienungsanleitung - Holländisch - 46 seiten

Brother RS-25 Bedienungsanleitung - Französisch - 46 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info