Bedienungsanleitung Brother RS-30 (Seite 3 von 46) (Englisch)

631330

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

——————————————————————————————————————————————————————————————

—

FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY

If this machine is fitted with a three-pin non-rewireable BS plug then please read the following.

IMPORTANT (in the United Kingdom)

Main supply (AC 230/240V, 50Hz)

DO NOT cut off the main plug from the equipment. If the plug

fitted is not suitable for the power outlet in your home or the

cable is too short to reach a power outlet, then obtain an

appropriate safety-approved extension lead or consult your

dealer.

BE SURE to replace the fuse only with an identical approved

type, as originally fitted, and to replace the fuse cover.

If the main plug is cut off, be sure to remove the fuse and

dispose of the plug immediately, to avoid a possible shock

hazard by inadvertent connection to the main power supply.

IMPORTANT (in the other countries)

If the available socket outlet is not suitable for the plug

supplied with this equipment, it should be cut off and an

appropriate three-pin plug should be fitted. With alternative

plugs, an approved fuse must be fitted in the plug.

NOTE: The plug severed from the main leads must be

destroyed as a plug with bared flexible cords is hazardous if

engaged in a live socket outlet. In the event that the plug

fuse is replaced, use a fuse approved by ASTA to BS 1362,

i.e., carrying the mark, rated as marked on the plug.

Always replace the fuse cover. Never use plugs with the

fuse cover omitted.

WARNING: DO NOT CONNECT EITHER

WIRE TO THE EARTH TERMINAL WHICH IS

MARKED WITH THE LETTER ‘E’ OR BY THE

EARTH SYMBOL , OR COLORED GREEN

OR GREEN AND YELLOW.

The wires in this main lead are colored in accordance with

the following code:

Blue Neutral

Brown Live

As the colors of the wiring in the main lead of this

appliance may not correspond with the colored markings

identifying the terminals in your plug, proceed as follows:

The wire that is colored blue must be connected to the

terminal marked with the letter ‘N’ or colored black or

blue.

The wire that is colored brown must be connected to the

terminal marked with the letter ‘L’ or colored red or brown.

CONNECTING PLUGS AND MAIN POWER/SEWING LIGHT SWITCH

1. Connect the three-prong plug into the machine.

2. Connect the electrical supply plug into a wall outlet.

• When leaving the machine unattended, the main

power switch of the machine should be switched off

or the plug must be removed from the socket outlet.

The main power/sewing light switch turns the main power

and sewing light on or off.

1 Turn on

2 Turn off

• When servicing the machine, removing covers or

changing bulbs, the machine must be unplugged.

XL5000us.book Page 2 Tuesday, October 28, 2003 11:01 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother RS-30 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother RS-30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info