Bedienungsanleitung Brother t 76 (Seite 15 von 98) (Englisch)

424009

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

Preparation and Simple Use Guide

PREPARATION

AND SIMPLE USE

Multi-Line Connections (PABXs)

Most offices use a central telephone system. While it is often relatively simple to connect the

machine to a key system or a PABX (Private Automatic Branch Exchange), we suggest that you

contact the company that installed your telephone system and ask them to connect the machine for

you. It is advisable to have a separate line for the machine. You can then leave the machine in FAX

ONLY Mode to receive faxes any time of day or night.

If the machine is to be connected to a multi-line system, ask your installer to connect the unit to the

last line on the system. This prevents the unit from being activated each time a telephone call is

received.

If you are installing the machine to work with a PABX:

It is not guaranteed that the unit will operate correctly under all circumstances with a PABX.

Any cases of difficulty should be reported first to the company that handles your PABX.

If all incoming calls will be answered by a switchboard operator, it is recommended that the

Answer Mode be set to MANUAL. All incoming calls should initially be regarded as telephone

calls.

The unit may be used with either pulse or tone dialling telephone service.

Using Extension Telephones

It may be that your premises are already wired with parallel extension telephones, or you intend to

add extension telephones to your line, in addition to your machine. While the simplest arrangement

is straightforward parallel connection, there are some reasons as to why this arrangement will cause

unsatisfactory service, the most obvious of which is inadvertent interruption of a facsimile

transmission by someone picking up an extension telephone in order to make an outgoing call.

Additionally, remote activation may not operate reliably in such a simple configuration.

This machine may also be set to make a delayed transmission (i.e. a transmission at a pre-set time).

This pre-set job may coincide with someone picking up an extension handset.

Such problems can easily be eliminated however, if you arrange modification of your extension

wiring circuit, such that extension devices are connected “downstream” of your machine, in a

master/slave configuration. In such a configuration, this machine can always detect whether a

telephone is in use, thus it will not attempt to seize the line during that time. This is known as

“telephone off-hook detection.”

The inadvisable configuration is shown in figure 1 below, and the recommended master/slave

configuration is shown in figure 2.

This new connection configuration can be arranged by your contacting BT, Kingston upon Hull

Telecommunications, your PABX maintainer or a qualified telephone installation company as

appropriate. Simply explained, the extension telephone circuit should be terminated on a normal

modular plug (BT 431A style), which in turn should be inserted into the modular socket of the white

“T”-shaped connector provided as part of the line cord assembly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother t 76 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother t 76

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info