Bedienungsanleitung Brother TD-4000 (Seite 8 von 36) (Englisch)

585294

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Introduction

The Machine

• The machine is a precision machine. Do not drop or hit the machine.

• Do not lift the machine by the RD Roll compartment cover. The cover could come off and

the machine could fall and become damaged.

• The machine may malfunction if left near a television, radio, etc. Do not use the machine

near any machine that can cause electromagnetic interference.

• Do not insert any objects into or block the label output slot, USB port, Serial port or LAN

port.

• Use only the interface cable (USB cable) included with the machine.

• Do not attempt to print labels while the RD Roll compartment cover is open.

• For information about your model's electrical rating, see the label attached to the base

of the machine.

Power Cord

• This product must be installed near an electrical socket that is easily accessible. In case

of emergencies, you must disconnect the power cord from the electrical socket to shut

off power completely.

RD Roll

• Use only genuine Brother accessories and supplies (with mark).

• If the label is attached to a wet, dirty, or oily surface, it may peel off easily. Before

applying the label, clean the surface to which the label will be applied.

• RD Roll uses thermal paper so that ultraviolet rays, wind, and rain may cause the colour

of the label to fade and the ends of the label to peel off.

• Do not expose the RD Rolls to direct sunlight, high temperatures, high humidity, or dust.

Store in a cool, dark place. Use the RD Rolls soon after opening the package.

• Scratching the printed surface of the label with your finger nails or metal objects, or

touching the printed surface with hands dampened by water, sweat, or medicated cream,

etc., can cause the colour to change or fade.

• Do not apply labels to any persons, animals, or plants. In addition, never apply labels to

public or private property without permission.

• The last label in an RD Roll may not be printed correctly. For this reason, the roll contains

more labels than that indicated on the package.

• When a label is removed after being applied to a surface, a portion of the label may

remain.

• Some RD Rolls use permanent adhesive for their labels. These labels cannot be easily

peeled off once attached.

• If the roll becomes unraveled, tighten the RD roll and realign both sides to restore the

RD roll to its original form before installing into the printer.

CD-ROM and Software

• Be careful not to scratch the CD-ROM. Do not place the CD-ROM in any location

exposed to high or low temperatures.

• Do not place heavy objects on the CD-ROM or bend it.

• The software on the CD-ROM is intended for use with this machine only. See the Licence

on the CD for details. This software may be installed on multiple computers for use in an

office, etc.

General Precautions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother TD-4000 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother TD-4000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info