Bedienungsanleitung Brother TD-4100N (Seite 31 von 36) (Englisch)

585295

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

STEP

Getting started

Reference

Introduction

Installing the software

Reference

If a problem occurs while using this machine, the following may help you to solve the

problems.

Problem Solution

The Brother TD-4000/4100N

machine printer does not print,

or a printing error is received.

• Is the cable loose?

Check that the cable is connected securely.

• Is the RD Roll installed correctly?

If not, remove the RD Roll and reinstall it.

• Is the RD Roll used up?

Replace the RD Roll.

• Is the RD Roll compartment cover open?

Check that the RD Roll compartment cover is closed correctly.

• Has a print error or transmission error occurred?

Turn off the machine and switch on again. If the problem still

occurs, contact Brother Customer Service.

• Does the guide not touch the left side of the paper RD Roll?

Move the guide against the side of the RD Roll.

• Is the media on top of the gap sensor?

Feed the media under the gap sensor.

The LED lamp is not lit.

• Is the power cord plugged in correctly?

Check that the power cord is plugged in. If inserted, try plugging

it into another electrical outlet.

• Has the main power switch located on the back of the machine

been turned on?

Make sure the main power switch is turned on.

* If the power button still does not light up, contact Brother

Customer Service.

The printed label contains

streaks or poor quality

characters, or the label did not

feed correctly.

• Is the print head or roller dirty?

While the print head generally remains clean under normal use,

lint or dirt from the roller may become stuck on the printer head.

If this occurs, clean the roller.

See

"Roller maintenance" on page 27.

A data transmission error

appears on the computer.

• Is the correct port chosen?

Check that the correct port is chosen from the “Print to the

following port” list in the Printer Properties dialog box.

• Is the machine in cooling mode (the LED lamp is flashing in

orange)?

Wait until the LED lamp stops flashing and then try printing

again.

• Is someone printing via network (TD-4100N only)?

If you try to print while other users are printing large amounts of

data, the printer is unable to accept your print job until the

ongoing printing is finished. In such situations, execute the print

job again after the other jobs are completed.

Labels are jammed in the cutter

or are not ejected correctly after

printing.

• Is there dirt or lint on the roller preventing it from rolling freely?

For details, please see

"Roller maintenance" on page 27.

The label is not ejected correctly

after printing.

• Check that the ejection path of the label is not blocked.

• Check that the RD Roll is set correctly by removing the RD Roll

and reinstalling.

• Ensure that the RD Roll compartment cover is closed correctly.

The print quality is poor

• Is there dirt or lint on the roller preventing it from rolling freely?

Clean the roller. For details, please see

"Roller

maintenance" on page 27.

2 Troubleshooting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother TD-4100N Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother TD-4100N

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info