463672
12
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
KNOWING YOUR SEWING MACHINE
11
Stitch length dial
Depending on the selected stitch, you may need to
adjust the stitch length for best results.
The numbers marked on the stitch length dial represent
the stitch length in millimeters (mm) (1/25 inch).
THE HIGHER THE NUMBER, THE LONGER THE
STITCH. With the “0” setting, material is not fed. This is
used when sewing a button.
The “F”-“1” range is for making a satin stitch (closed
zigzag stitch), which is used for making buttonholes
and decorative stitches. The position needed for making
the satin stitch varies according to the material and
thread being used. To determine the exact dial position,
first test the stitch and length settings on a scrap piece of
fabric to observe the feeding of the material.
1 Stitch length dial
2 Shorter
3 Longer
CAUTION
Reverse sewing lever
You can use reverse sewing for back tacking and
reinforcing seams.
To sew in reverse, push the reverse sewing lever in as
far as possible and hold it in that position while you
lightly push the foot controller. To sew forward, release
the reverse sewing lever. The machine will then sew
forward.
1 Reverse sewing lever
Fixed 2.5
(3/32)
27
TRIPLE STRETCH
STITCH
(Center Needle
Position)
Fixed 2.5
(3/32)
32
TRIPLE ZIGZAG
STRETCH STITCH
1.5 (1/16)
Fixed 2.5
(3/32)
32
TRIPLE ZIGZAG
STRETCH STITCH
3.5 (1/8)
Fixed 2.5
(3/32)
32
TRIPLE ZIGZAG
STRETCH STITCH
5 (3/16)
Fixed 2.5
(3/32)
31
ELASTIC OVERLOCK
STITCH
5 (3/16)
Fixed 2.5
(3/32)
31
FEATHER STITCH 5 (3/16)
Fixed 2.5
(3/32)
31
COMB STITCH 5 (3/16)
Fixed 2.5
(3/32)
32
DECORATIVE
STITCH
5 (3/16)
Fixed 2.5
(3/32)
32
DECORATIVE
STITCH
5 (3/16)
Fixed 2.5
(3/32)
30
FAGOTING STITCH 5 (3/16)
Fixed 2.5
(3/32)
30
DECORATIVE
STITCH
5 (3/16)
Pattern
Recommended
Length
(mm (inch))
Reference
Page
Stitch Name
Preset Width
(mm (inch))
15
16
17
18
19
20
21
22
23
24
25
If the stitches are bunched together,
lengthen the stitch length and continue
sewing. Do not continue sewing without
lengthening the stitch length, otherwise
the needle may break and cause injury.
1
2
3
1
1
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Brother XN-2500 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Brother XN-2500

Brother XN-2500 Bedienungsanleitung - Deutsch - 48 seiten

Brother XN-2500 Bedienungsanleitung - Holländisch - 48 seiten

Brother XN-2500 Bedienungsanleitung - Französisch - 48 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info