Bedienungsanleitung BT BT1200 (Seite 1 von 2) (Englisch)

650203

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

How to recycle your equipment

The symbol shown here and on the product

means that the product is classed as electrical

or electronic equipment, so DO NOT put it in

your normal rubbish bin.

It’s all part of the Waste Electrical and Electronic

Equipment (WEEE) Directive to recycle products in

the best way – to be kinder to the planet, get rid of

dangerous things more safely and bury less rubbish

in the ground.

You should contact your retailer or supplier for

advice on how to dispose of this product in an

environmentally friendly way.

Warning

You won’t be able to call 999 from this phone if

there’s a power cut, so make sure you’ve got

another way to call for help in an emergency.

R&TTE Directive & Declaration of Conformity

This product is intended for use within the UK for

connection to the public telephone network and

compatible switchboards.

This equipment complies with the essential

requirements for the Radio Equipment and

Telecommunications Terminal Equipment Directive

(1999/5/EC).

For a copy of the Declaration of Conformity

please refer to bt.com/producthelp

BT1200

Digital Cordless Phone

General information

For information on safety instructions,

cleaning, technical information or

connecting to a switchboard, please refer

to the ‘General information’ section in the

full user guide at bt.com/producthelp

Guarantee

Your BT1200 is guaranteed for a period of 12 months

from the date of purchase.

Subject to the terms listed below, the guarantee

will provide for the repair of, or at BT’s or its agent’s

discretion the option to replace the BT1200, or any

component thereof, (other than batteries), which is

identied as faulty or below standard, or as a result of

inferior workmanship or materials. Products over 28

days old from the date of purchase may be replaced

with a refurbished or repaired product.

The conditions of this guarantee are:

• The guarantee shall only apply to defects that occur

within the 12 month guarantee period.

• Proof of purchase is required.

• The equipment is returned to BT or its agent as

instructed.

This guarantee does not cover any faults or defects

caused by accidents, misuse, fair wear and tear,

neglect, tampering with the equipment, or any

attempt at adjustment or repair other than through

approved agents.

This guarantee does not aect your statutory rights.

To nd out what to do, if your phone is in or outside

of the 12 month guarantee, please look in the full user

guide at bt.com/producthelp

What’s in the box

Handset Mains power adaptor

(item code 066773)

Telephone line cord

(pre-installed)

2x AAA NiMH 500mAh

rechargeable batteries

(already in handset)

Base

Important: Only use the mains power adaptors, cables and rechargeable batteries

supplied in this box, or this product may not work. Any replacement rechargeable

batteries must be the same type. BT accepts no responsibility for damage caused to

your phone by using any other type of batteries.

Handset Charger Mains power adaptor

(item code 066773)

2x AAA NiMH 500mAh rechargeable

batteries (already in handset)

For each additional handset (if you’ve bought a multipack)

1 Plug in

066773

1 The telephone line cord is already tted,

plug the other end into the wall socket.

2 Plug the mains power adaptor into

the base, with the cable clipped in the

groove provided.

3 Plug the other end of the power

adaptor into the wall power socket

and switch on.

2 Charge

1 Activate the batteries by pulling the plastic tab away from the

back of the handset.

2 Place the handset on the base and leave to charge the batteries

for 16 hours. The handset gives a conrmation tone.

Important: you should charge the batteries for 16 hours before

using the handset for the rst time.

Set up your additional handsets (if you’ve bought a multipack)

1 For each additional handset and charger: plug the mains power adaptor into the

socket on the underside of the charger, secure the cable behind the retaining clip and

plug the other end into the wall power socket and switch on.

2 Activate the batteries as shown above. Then place the handset on the charger

to charge for 16 hours.

Remove this tab

and charge batteries

for 16 hours before use.

Rechargeable batteries

already ﬁtted

16 hrs

Your BT1200 is now ready to use.

Please

turn

over

Please

turn

over

Oces worldwide

Registered Oce: 81 Newgate Street, London EC1A 7AJ

Registered in England No. 1800000

Designed and produced by The Art & Design Partnership (ADP).

Printed in China / Issue 1 / ADP05-16

Free Technical Help & Support

bt.com/producthelp

Call us or go online if you have any

diﬃculties with your phone

0800 218 2182

If you need to remove the batteries, slide open the battery compartment cover

and using the nger hole, grip the batteries and gently pull them out.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BT BT1200 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BT BT1200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info