650203

BT BT1200 Seite 2

2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
Using the menu
• Press to open the main menu, scroll through menu items using or .
When the menu you want is displayed, press . Press or to scroll through
the sub-menus and press to select.
• Use
to select options displayed above the button, on the display.
• Use
to exit a menu or go back.
• If no buttons are pressed for 30 seconds the handset will return to the idle screen.
Handset volume and sounds
Incoming speech volume
During a call, press or to increase or decrease the volume of your caller’s voice.
Handset ringer volume
1 Press , scroll to HS SETTINGS, press .
2 Scroll
to RING SETUP, press . EXT. RING is displayed.
3 Scroll
to RING VOLUME, press .
4 Press
or to adjust the volume, press to save.
Turn ringer o
Press and hold to turn ringer o and on.
Handset ringtone (for external or internal calls)
1 Press , scroll to HS SETTINGS, press .
2 Scroll
to RING SETUP, press . EXT. RING is displayed, press or press
to display INT. RING TONE then press .
3 Press
or to hear ringtones, press to save.
HANDSET 1
Press to enter the main menu, access
sub-menus and conrm options.
Enter Calls list.
Move up through menu options.
Increase volume.
Access your Contact list and add
new contacts.
In standby mode make/receive phone calls.
In standby, press and hold to dial BT 1571.
Press and hold to turn the ringer on or o.
Press to conrm the option displayed
above the button, to delete or go back
to the previous screen.
Press during a call to mute your caller.
R (Recall) used when connected to a
switchboard/PBX and with some
BT Calling Features.
End a call.
Press and hold to turn handset on/o.
In standby mode, press to see redial list.
Move down through menu options.
Decrease volume.
Handset buttons and display icons
Handset ringer o
Signal strength
New missed call
On – line is in use
Flashing – incoming call
Block call feature on
On – alarm is set
Flashing – alarm time reached
Battery charge status
Empty and ashing when
needs recharging
Handset name
Troubleshooting
Most problems can be xed with a few simple checks.
Problem Solution
No dial tone or line cord error
message displayed on-screen
Only use the cables and batteries supplied. Make sure
both the mains power adaptor cable and telephone line
cord are plugged into the correct sockets.
Poor speech quality Make sure the product is not located too close to other
electrical appliances. This can also help to improve the
handset range from the base.
Battery icon is
animated in a cycle
when charging
The battery charge is very low. Make sure you charge
the batteries for 16 hours before use to ensure
maximum battery performance.
Using broadband on the
same phone line?
To avoid problems with your broadband or noise on your
phone line, you might need to plug your telephone line
cord into the wall via a microlter (not supplied).
If your main phone socket
has a single socket,
as shown, you’ll
need to use
microlters.
You don’t need to use
microlters if your main
phone socket has two
separate sockets, like
either of these:
* Calls made from within the UK mainland network are free. Mobile and international call costs may vary.
† Requires a subscription to a Caller Display service from your network provider. Charges may apply.
You’ll need Caller Display
To get the most from your nuisance call blocker phone and for all the features to work,
you’ll need to subscribe to a Caller Display service from your network provider.
Charges may apply.
Making and receiving calls
Make and end a call
Press green , enter phone number using keypad. Press red to end the call.
Answer a call
Lift handset from base or charger. If the handset is not on the base or charger, you’ll need
to press green .
Mute
Press during a call. Press to return to your caller.
View or dial a number in Calls list
†
The Calls list stores details of the last 20 incoming calls.
1 Press
to open the calls list and scroll to an entry.
2 Press green
to dial the number.
Or to view call details, press
. DETAILS is displayed. Press .
Block incoming call number in your Calls list
†
1 Press , scroll to the entry and press . DETAILS is displayed.
2 Scroll to ADD TO BLIST (blacklist) and press
.
3 Enter name using keypad, press
. The number is displayed, press to save.
4 Press red
. Press , scroll to CALL BLOCKER, press .
5 Scroll to SETTINGS, press
.
6 Scroll to BLOCK MODE and press
. Select BLOCK BLIST, press . Scroll to
ALWAYS ON, press . The icon is displayed.
To view, delete or add numbers manually to the blacklist go to CALL BLOCKER menu.
Note, the same phone number can’t be saved in the blacklist and phonebook.
3 Using your phone
Phonebook
Store entry in phonebook (up to 50)
1 In idle mode, press . EMPTY is displayed if there are no numbers.
2 Press
to select ADD. Enter name using keypad and press .
3 Enter phone number and press
to save.
4 Press
to select ring melody, then to save.
To save a number to your phonebook from the Calls list, press
. Scroll to the entry
you want to save and press . Scroll to ADD TO PB (phonebook) and press .
Enter name using keypad and press . The number is displayed, press to save.
Then follow step 4 above.
If you have more than one handset registered to the base, your contacts are automatically
updated to all handsets (up to 6 handsets).
Dial entry in phonebook
1 In idle mode, press .
2 Scroll
or to display the entry and press green to dial.
Using the keypad
• When entering letters you may need to press the same button a few times until the
letter you want is displayed, e.g. press once for A, twice for B, three times for C
• To enter a space, press
Need some help?
Frequently asked questions and a full user guide are available online.
bt.com/producthelp
If you cannot nd the answer to your question in the full online user guide,
call our free Helpline. Our dedicated advisors are more likely to be able to
help you than the retailer where you bought your phone.
0800 218 2182*
This user guide is also available in other formats: large print, Braille and audio CD.
Call the helpline for a copy.
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für BT BT1200 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von BT BT1200

BT BT1200 Bedienungsanleitung - Englisch - 50 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info