Bedienungsanleitung BT BT2200 (Seite 1 von 2) (Englisch)

650200

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

ITEM CODE: 086901

How to recycle your equipment

The symbol shown here and on the product

means that the product is classed as electrical

or electronic equipment, so DO NOT put it in

your normal rubbish bin.

It’s all part of the Waste Electrical and Electronic

Equipment (WEEE) Directive to recycle products in

the best way – to be kinder to the planet, get rid of

dangerous things more safely and bury less rubbish

in the ground.

You should contact your retailer or supplier for advice

on how to dispose of this product in an environmentally

friendly way.

Warning

You won’t be able to call 999 from this phone if there’s

a power cut, so make sure you’ve got another way to

call for help in an emergency.

R&TTE Directive & Declaration of Conformity

This product is intended for use within the UK for

connection to the public telephone network and

compatible switchboards.

This equipment complies with the essential

requirements for the Radio Equipment and

Telecommunications Terminal Equipment Directive

(1999/5/EC).

For a copy of the Declaration of Conformity

please refer to bt.com/producthelp

BT2200

Digital Cordless Phone

General information

For information on safety instructions,

cleaning, technical information or connecting

to a switchboard, please refer to the ‘General

information’ section in the full user guide at

bt.com/producthelp

Guarantee

Your BT2200 is guaranteed for a period of 12 months

from the date of purchase.

Subject to the terms listed below, the guarantee

will provide for the repair of, or at BT’s or its agent’s

discretion the option to replace the BT2200, or any

component thereof, (other than batteries), which is

identied as faulty or below standard, or as a result of

inferior workmanship or materials. Products over 28

days old from the date of purchase may be replaced

with a refurbished or repaired product.

The conditions of this guarantee are:

• The guarantee shall only apply to defects that occur

within the 12 month guarantee period.

• Proof of purchase is required.

• The equipment is returned to BT or its agent as

instructed.

This guarantee does not cover any faults or defects

caused by accidents, misuse, fair wear and tear,

neglect, tampering with the equipment, or any

attempt at adjustment or repair other than through

approved agents.

This guarantee does not aect your statutory rights.

To nd out what to do, if your phone is in or outside

of the 12 month guarantee, please look in the full user

guide at bt.com/producthelp

What’s in the box

Mains power adaptor

(item code 066270)

Telephone line cord

(pre-installed)

2x AAA NiMH 550mAh

rechargeable batteries

(already in handset)

1 Plug in 2 Charge

1 Activate the batteries by pulling the plastic tab away from

the bottom of the handset.

2 The handset will check for a link with the base station.

Once found, follow the prompt to set the date and time.

3 Place the handset on the base to charge the batteries for 16 hours.

Important: you should charge the batteries for 16 hours before

using the handset for the rst time.

16 hrs

Your BT2200 is now ready to use.

Please

turn

over

Please

turn

over

Important: Only use the mains power adaptors, cables and rechargeable batteries

supplied in this box, or this product may not work. Any replacement rechargeable

batteries must be the same type. BT accepts no responsibility for damage caused to

your phone by using any other type of batteries.

Mains power adaptor

(item code 066270)

2x AAA NiMH 550mAh rechargeable

batteries (already in handset)

For each additional handset (if you’ve bought a multipack)

Set up your additional handsets (if you’ve bought a multipack)

1 For each additional handset and charger: plug the mains power adaptor into the

socket on the underside of the charger, secure the cable behind the retaining clip

and plug the other end into the wall power socket and switch on.

2 Activate the batteries as shown above. Then place the handset on the charger

to charge for 16 hours.

Handset

Charger

1 The telephone line cord is already tted,

plug the other end into the wall socket.

2 Plug the mains power adaptor into

the base, with the cable clipped in the

groove provided.

3 Plug the other end of the power

adaptor into the wall power socket

and switch on.

Rechargeable batteries

already fitted

Remove this tab

and charge batteries

for 16 hours before use.

If you need to remove the batteries, place your ngers in the groove at the bottom

of the handset and lift the cover up to release it. Then gently ease the batteries out.

21 3

Oces worldwide

Registered Oce: 81 Newgate Street, London EC1A 7AJ

Registered in England No. 1800000

Designed and produced by The Art & Design Partnership (ADP).

Printed in China / Issue 2 / ADP09-16

Free Technical Help & Support

bt.com/producthelp

Call us or go online if you have any

diﬃculties with your phone

0800 145 6789

Base

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BT BT2200 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BT BT2200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info