Bedienungsanleitung BT BT2200 (Seite 2 von 2) (Englisch)

650200

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

* Calls made from within the UK mainland network are free. Mobile and international call costs may vary.

† Requires a subscription to a Caller Display service from your network provider. Charges may apply.

Menu / Left option button

Press to enter the main menu, access

sub-menus and conrm options.

Enter Call log.

Move up through menu options.

Increase volume.

Open redial list.

In standby mode, make/receive phone calls.

In talk mode switch handsfree on/o.

Access your stored phonebook.

Move down through menu options.

Decrease volume.

Do Not Disturb

In standby mode, press to silence all calls

including those in your VIP list. Press again

to switch this mode o.

Mute / Right option button

Press to conrm the option above the

button, to delete or go back to the

previous screen.

Press during a call to mute your caller.

Press again to speak to your caller.

Recall (R) used when connected to

a switchboard/PBX and with some

BT Calling Features.

Press and hold to enter a Pause (P).

End a call.

Press and hold to turn handset on/o.

Handset buttons and display icons

Phonebook open

New missed call received

Line is in use

Flashing – incoming call

Battery charge status

Empty and ashing when

needs recharging

You’ll need Caller Display

To get the most from your nuisance call blocker phone and for all the features to work,

you’ll need to subscribe to a Caller Display service from your network provider.

Charges may apply.

3 Using your phone

Using the keypad

• When entering letters you may need to press the same button a few times until the

letter you want is displayed, e.g. press once for A, twice for B, three times for C

• To enter a space, press .

• To toggle between upper and lowercase characters, press and hold .

Need some help?

Frequently asked questions and a full user guide are available online.

bt.com/producthelp

If you cannot nd the answer to your question in the full online user guide,

call our free Helpline. Our dedicated advisors are more likely to be able to

help you than the retailer where you bought your phone.

0800 145 6789*

This user guide is also available in other formats: large print, Braille and audio CD.

Call the helpline for a copy.

Using the menu

• Press to open the main menu, scroll through using or . When the menu

you want is displayed, press . Press or to scroll through the sub menus and

press to select.

• and buttons let you select options displayed above the buttons on the display.

• Use to exit a menu or go back.

• If no buttons are pressed for 30 seconds the handset will return to the idle screen.

Handset volume and sounds

Incoming speech volume

During a call, press or to increase or decrease the volume of your caller’s voice.

Handset ringer volume

1 Press , scroll to Personal Set, press .

2 Handset Tone is displayed, press .

3 Ring Volume is displayed, press .

4 Scroll or to adjust the volume, press to save.

Handset ringtone

1 Press , scroll to Personal Set, press .

2 Handset Tone is displayed, press .

3 Scroll to Ring Melody, press .

4 Press or to hear ringtones, press to save.

Troubleshooting

Most problems can be xed with a few simple checks.

Problem Solution

No dial tone Only use the cables supplied.

Make sure the telephone line cord is plugged in correctly.

Handset not charging Make sure the handset is turned on before placing on the

base or charger to charge.

Phone ringer does not ring The ringer volume may be set to Ringer o. Adjust the

handset Ring volume. Check that Block mode or Do Not

Disturb is not switched on.

Using broadband on the

same phone line?

To avoid problems with your broadband or noise on your

phone line, you might need to plug your telephone line

cord into the wall via a microlter (not supplied).

If your main phone socket

has a single socket,

as shown, you’ll

need to use

microlters.

You don’t need to use

microlters if your main

phone socket has two

separate sockets, like

either of these:

What’s the button on

the base used for?

Press and all handsets registered to the base will ring.

Once found, press again to stop the ringing.

The is also used when registering additional

handsets, press and hold to enter registration mode.

See the full user guide online for registration instructions.

Long press to make an internal call to another handset

registered to the base if only two handsets are registered.

Long press to enter intercom handset select list if there are

more than two handsets registered to the base.

to Speed dial buttons

In standby, press and hold to dial a

stored speed dial number.

Making and receiving calls

Make and end a call

Press green then dial the phone number. Press red to end the call.

Answer a call

Press green when the phone is ringing.

To answer a call without having to press , you can set Auto Pick-Up to On. To do this,

press , scroll to Personal Set, press . Scroll to Auto Pick-Up and press . Scroll

to On and press .

Mute

Press during a call. Press to return to your caller.

View or dial a number in Calls list

†

The Calls list stores details of the last 50 incoming calls.

1 Press , then . Press or to scroll through the list.

2 Press to dial the number.

Nuisance Call Blocking

†

Block an incoming call number in your Call list

1 Press to enter the Call Log. Call List is displayed, press . Then scroll to the entry

you want to block and press .

2 Scroll down to Call Block, press .

3 Screen will show the number that will be blocked. Press and number will be blocked

as soon as call blocking is turned on following the instructions below.

Turn call blocking on to enable block list

1 Press , scroll to Call Block and press again. Enter default PIN 0000.

2 Scroll to Blacklist and press . Then scroll to Block mode and press again.

3 Scroll to Block List and press .

4 Scroll to Always On to enable the block list feature. Or, you can set the feature to

block calls from your block list between set times, using the Start & end options.

Phonebook

Store entry in phonebook (up to 50)

1 Press , scroll to Phonebook and press again. Scroll to New Entry, press .

2 Enter name using keypad and press .

3 Enter phone number and press to save.

4 Add to VIP? is displayed. Press if you want to add to your VIP list. Saved!

is displayed. Or, press to save as a normal contact without adding to the VIP list.

To save a number to your phonebook from the Calls list, press , then . Scroll to the

number and press . Save Number is displayed, press . Enter name and press .

Edit the number if required, press to save.

Dial entry in phonebook

1 From the home screen, press .

2 Scroll or to display the entry and press to dial.

Alarm is set

Handsfree on

Handset ringer o

Signal strength

Handset name

BT BT2200 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BT BT2200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info