To delete stored numbers
Lift the handset.
Press the STORE button. The call
indicator light will flash.
Press the memory location
number (0-9) or (M1
, M2, M3)
under which you have stored the
number you wish to delete.
Press the STORE button.
You will hear a confirmation tone.
Replace the handset.
Alternatively, any existing
number stored in the Quickdial
or One-Touch memories can be
overwritten by entering a new
number under the same memory
location. Simply follow the
instructions under the storing
numbers sections previously shown.
BT Accessories and
Replacement Items
For a full range of accessories and
replacement items for BT
products please call 0870 240 5522,
or visit:
Wall
mounting
1. Locate lugs and mount the
plinth provided into the holes
under the base unit as shown.
2. Swing the plinth down to clip
into the top hole.
3. Drill 2 holes, 25mm deep using
a 3mm drill, for the screws
provided, using the template.
Ensure that you do not drill into
any hidden wiring or pipes.
Insert the wall plugs provided
and then insert a screw into each
hole. Leave 2-3mm between the
head of the screw and the wall.
4. Position the product onto the
screws.
5. Drop down to secure.
R&TTE Directive
Hereby, Suncorp Technologies Ltd,
declares that this BT Decor 110
is in compliance with the essential
requirements and other relevant
provisions of Directive 1999/5/EC.
The Declaration of Conformance
for the BT Decor 110 is published
on the website
http://www.suncorptech.com/bt
Note
You can mix manual and
memory dialling as required, for
example, you can dial the area
code 020 8304 from the memory
and then complete the number
manually.
Note
If any error occurs in the storing
mode you will hear three short
beeps, then the product will
return to talk mode.
If you unplug your BT Decor 110
the numbers stored in the
memory will be saved. However,
the last number redial memory
will be lost.
General information
Guarantee
Your BT Decor 110 is guaranteed
for a period of 12 months from the
date of purchase.
Subject to the terms listed below
the guarantee will provide for the
repair of, or at BT’s or its agent’s
discretion the option to replace the
BT Decor 110, or any component
thereof, which is identified as
faulty or below standard, or fails as
a result of inferior workmanship
or materials. Products over 28 days
old from the date of purchase
may be replaced with a refurbished
or repaired product.
The conditions of this
guarantee are:
• The guarantee shall only apply
to defects that occur within the
12 month guarantee period.
• Proof of purchase is provided.
• The equipment is returned to
the point of purchase.
• This guarantee does not cover
any faults or defects caused by
accidents, misuse, fair wear
and tear, neglect, tampering
with the equipment, or any
attempt at adjustment or repair
other than by approved agents.
• This guarantee does not affect
your statutory rights.
Within the 12 month guarantee
period:
In the unlikely event of a defect
occurring, please return the
product, with the receipt, to the
place of purchase.
Outside of the 12 month
guarantee period:
If your product needs repair after
the guarantee period has ended,
the repair must meet the approval
requirements for connection to the
telephone network. We recommend
that you contact BT’s approved
repair agent, TecLogic on 01672
564444 or a local qualified repairer.
If you have to return your
BT Decor 110
Pack the unit securely, preferably
in the original packaging. All parts
must be returned. We cannot take
responsibility for goods damaged
in transit.
Technical information
How many telephones can you
have?
All items of telephone equipment
have a Ringer Equivalence
Number (REN), which is used to
calculate the number of items
which may be connected to any
one telephone line. Your
BT Decor 110 has a REN of 1.
A total REN of 4 is allowed, if the
total REN of 4 is exceeded, the
telephones may not ring. With
different telephone types there is
no guarantee of ringing, even
when the REN is less than 4.
Switchboard compatibility
This product is intended for use
within the UK for connection to
the public telephone network and
compatible switchboards, which
support tone dialling and time
break recall. If in doubt please
consult your service provider.
Offices worldwide
The telecommunications services described in
this publication are subject to availability and
may be modified from time to time. Services
and equipment are provided subject to British
Telecommunications plc’s respective standard
conditions of contract. Nothing in this publication
forms any part of any contract.
© British Telecommunications plc 2003.
Registered Office: 81 Newgate Street, London
EC1A 7AJ.
Registered in England No. 1800000.
BT Decor 110 Issue 2 (8/03) 1
Designed by the Art & Design Partnership
Limited.
Printed in China.
BT Decor 110 ~ Issue 2 ~ 1st Edition ~ 27th August ’03 ~ 5596 BT Decor 110 ~ Issue 2 ~ 1st Edition ~ 27th August ’03 ~ 5596 BT Decor 110 ~ Issue 2 ~ 1st Edition ~ 27th August ’03 ~ 5596
4
5
1
2
69mm
BT Decor 110
CORDED TELEPHONE
This product is intended
for connection to analogue public switched
telephone networks and private switchboards
in the United Kingdom.
