To re-set to TONE dialling
• Press the STO button then the # button.
• Press the 1 button.
• Enter the current system code.
(Factory setting 0000.)
• Press the LNR button.
• Press the buttons 0, 3, 7.
• Press the STO button to set tone dialling.
To set Time Break Recall with Tone dialling
• Press the STO button.
• Press the # button.
• Press the 1 button.
• Enter the current system code.
(Factory setting 0000.)
• Press the LNR button.
• Press the buttons 0, 3, 7.
• Press the STO button.
To set to Earth Recall with Tone dialling
• Press the STO button.
• Press the # button.
• Press the 1 button.
• Enter the current system code.
(Factory setting 0000.)
• Press the LNR button.
• Press the buttons 0, 3, 6.
• Press the STO button.
10 Setting the TONE or PULSE
mode
Your Diverse 1010 is preset to TONE dialling –
where you hear a tone beep each time you dial
a number. Tone dialling is suitable for all
modern digital exchanges. If you cannot make
a call with TONE dialling, you may need to
switch to PULSE dialling.
To set PULSE dialling
• Press the STO button then the # button.
• Press the 1 button.
• Enter the current system code.
(Factory setting 0000.)
• Press the LNR button.
• Press the buttons 0, 3, 3.
• Press the STO button to set pulse dialling.
If the symbol flashes continuously, it means
the handset is either out of range or is not
registered with the base unit. To register, follow the
steps on page 24. All additional handsets you
purchase will need to be individually registered
with the base unit before they will work with the
Diverse 1010. The symbol may also flash after
a power failure. Provided the handset has been
registered with the base, the symbol will stop
flashing after a while indicating the handset has
automatically re-registered to the base unit.
If it continues to flash, re-register the handset to
the base unit, see page 24.
