Bedienungsanleitung BT Duet 550 (Seite 1 von 2) (Englisch)

648671

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Setting Up

Please read the instructions carefully before use, and keep this

user guide for future reference.

Connect the telephone line cord

Safety information

Do not expose to direct sunlight.

Do not stand your product on carpets or other surfaces which

generate fibres, or place it in locations preventing free flow of air

over its surfaces.

Do not submerge any part of your product in water and do not

use it in damp or humid conditions, such as bathrooms.

Do not expose your product to fire, explosive or other hazardous

conditions.

Cleaning

Simply clean the handset and base station with a damp (not wet)

cloth, or an antistatic wipe. Never use household polish as this

will damage the product. Never use a dry cloth as this may

cause a static shock.

Duet 550 – Edition 2 – 26.7.00

At a glance

Quickdial

Recall

Secrecy

Redial

Program

Pause

Ringer

Hook switch

Lets you make a

follow-on call without

replacing the handset.

Speaker volume

control buttons

Used to adjust the

speaker volume

of a call.

Quickdial button

Use to store and dial

Quickdial numbers.

Secrecy button

Allows you to talk

to someone in the

same room without

your caller hearing.

Memory label

To keep a note

of your one-touch

numbers.

Memory buttons

Use to store and

dial one-touch

numbers.

Recall button

For use with

switchboards and

BT Select Services.

Redial button

Press to redial the

last number called

or to enter a pause

in the memory.

To adjust the ringer tone and volume

Your Duet 550 has 3 ringer tones to choose from. The volume of

the tone can also be adjusted or you can turn the ringer off. See

the table opposite to help you select the right setting.

•Press the SECRECY button. The LED will start to flash.

•Press the

button.

•Press the keypad button, 0 to 9, for the tone/volume you want.

You will hear a beep to confirm your setting. The beep is from

the handset and not audible unless held up to the ear.

•Press the SECRECY button. The LED will stop flashing.

Your selected setting is now stored.

To adjust the speaker volume

The speaker volume can only be adjusted when the telephone is

off the base.

The switch can be found on the left hand side of the telephone.

There are 5 levels. 1 = quietest. 5 = loudest.

The volume will remain at the level you have set between calls

until you adjust it again.

Press to increase the volume.

Press to decrease the volume.

Duet 550 – Edition 2 – 26.7.00

Using your Duet 550

telephone

To make a call

•Lift the handset. You will hear a dial tone.

•Enter the telephone number. The number will be dialled.

To end a call

•Replace the handset.

To redial the last number

•The last number dialled is stored in the redial memory.

•Press the REDIAL button. The number is dialled automatically.

To switch secrecy on and off

When on a call you can talk to someone in the same room,

without your caller hearing.

•During a call press the SECRECY button.

The LED will flash to indicate that secrecy is on. You can talk

and your caller will not hear you.

•To resume your call press the SECRECY button again.

The LED will stop flashing.

If you are redialling a number when connected to a switchboard,

wait until you hear a dial tone, then press the 9 button, wait again

for a dial tone and then press REDIAL. This applies even if 9 is

stored in REDIAL.

down

Redial

Secrecy

Duet 550 – Edition 2 – 26.7.00

Volume Quiet Medium Loud

Tone 1 123

Tone 2 456

Tone 3 789

No Tone 0 = Silent

When the ringer is switched off the ring indicator light will continue

to flash to indicate an incoming call. The ringer will remain

switched off until you lift the handset again. It is not possible to

switch the ringer off permanently.

To use the Recall button

You may need to use the RECALL button if you are connected

to a switchboard/PBX (Private Branch Exchange), contact your

PBX supplier for further information. The RECALL button is

also used for BT Select Services.

To store a number using the MEMORY buttons

(M1, M2, M3)

•Press the SECRECY (Program) button. The LED will start

to flash.

•Press the MEMORY button (M1, M2, or M3) under which you

want to store the number.

•Use the keypad to enter the telephone number.

•Press the SECRECY button. The LED will stop flashing.

The number is now stored.

Storing and dialling numbers

You can store up to 10 numbers in the QUICKDIAL memory

(0 to 9) and a further 3 numbers using the MEMORY buttons

(M1, M2 and M3).

Your Duet 550 comes with memory labels which can be used

to keep a note of your stored numbers.

To store a pause in the dialling sequence of a memory number,

e.g, 9, pause, 6, press the REDIAL button. Please note that if a

pause is entered in a memory location in any of the 1st 5 digits it

will cause a 2 second pause. If a pause is stored after the 5th digit

dialling will stop until the REDIAL (pause) button is pressed.

Recall

M3M2M1

Secrecy

Duet 550 user guide 6pp 10/8/00 3:23 pm Page 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BT Duet 550 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info