Bedienungsanleitung BT Elements 1K (Seite 1 von 2) (Englisch)

650170

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

General information

For information on safety instructions,

cleaning, technical information or

connecting to a switchboard, please

refer to the ‘General Information’

section in the full user guide at

bt.com/producthelp

Guarantee

Your BT Elements 1K is guaranteed for a period of 12

months from the date of purchase.

Subject to the terms listed below, the guarantee

will provide for the repair of, or at BT’s or its agent’s

discretion the option to replace the BT Elements 1K, or

any component thereof, (other than batteries), which

is identiﬁed as faulty or below standard, or as a result

of inferior workmanship or materials. Products over 28

days old from the date of purchase may be replaced

with a refurbished or repaired product.

The conditions of this guarantee are:

• The guarantee shall only apply to defects that

occur within the 12 month guarantee period.

• Proof of purchase is required.

• The equipment is returned to BT or its agent

as instructed.

This guarantee does not cover any faults or defects

caused by accidents, misuse, fair wear and tear,

neglect, tampering with the equipment, or any

attempt at adjustment or repair other than through

approved agents.

This guarantee does not affect your statutory rights.

To ﬁnd out what to do, if your phone is in or outside

of the 12 month guarantee, please look in the full user

guide at bt.com/producthelp

How to recycle your equipment

The symbol shown here and on the product

means that the product is classed as electrical

or electronic equipment, so DO NOT put it in

your normal rubbish bin.

It’s all part of the Waste Electrical and Electronic

Equipment (WEEE) Directive to recycle products in

the best way – to be kinder to the planet, get rid of

dangerous things more safely and bury less rubbish

in the ground.

Please contact the supplier for advice on how to

dispose of this product in an environmentally

friendly way.

Battery information

Caution: risk of explosion if battery is replaced by an

incorrect type.

DO NOT put used batteries in your normal rubbish bin.

You can dispose of them at council recycling sites as

well as at some shops and shopping centres.

Warning

You won’t be able to call 999 from this phone if

there’s a power cut, so make sure you’ve got

another way to call for help in an emergency.

R&TTE Directive & Declaration of Conformity

This product is intended for use within the UK for

connection to the public telephone network and

compatible switchboards.

This equipment complies with the essential requirements

for the Radio Equipment and Telecommunications

Terminal Equipment Directive (1999/5/EC). For a

copy of the Declaration of Conformity please refer

to bt.com/producthelp

2 Charge

1 Plug the remaining mains power adaptor into the back of the charger and plug the

other end into the mains power wall socket and switch the power on.

2 Remove the handset wrap and place the handset on the charger. The red charging

light will come on and the handset will check for a link with the base station.

Once found, follow the set-up wizard.

3 Once set up is complete your handset will display ‘Line cord error. Please check,’

press Hide and leave the handset on the base to charge for 24 hours.

4 After 24 hours plug the telephone line cord from the base into the telephone

wall socket.

Long range antenna

To achieve the full 1km range from your handset you’ll need to attach the long range

antenna provided. Simply unscrew the smaller antenna on the handset and replace

with the long range antenna.

Your BT Elements 1K is now ready to use.

Please

turn

over

Check box contents

Handset

2x Mains power adaptors

(item code 066270)

Telephone line cord

(pre-installed)

Li-ion 3.7V

550mAh battery

(already in handset)

Base

1 Plug in

Important: Only use the mains power adaptors, cables and rechargeable batteries

supplied in this box, or this product may not work. Any replacement rechargeable

batteries must be of the same type. BT accepts no responsibility for damage

caused to your BT Elements 1K by using any other type of batteries.

Handset

Charger

Mains power adaptor

(item code 066270)

Li-ion 3.7V

550mAh battery

(already in handset)

Contents for each additional handset (multipacks only)

1 Plug the mains power adaptor into

the base, with the cable clipped in the

groove provided.

Turn the cable when clipping into the

groove so that the narrow part ﬁts

between the clips before turning cable

back to secure.

2 Plug the other end of the power

adaptor into the wall power socket

and switch on. You will hear a

conﬁrmation tone.

3 The telephone line cord is already ﬁtted

but don’t plug the other end into the

wall socket yet.

Ofﬁces worldwide

The services described in this publication are subject to availability and may be

modiﬁed from time to time. Services and equipment are supplied subject to

British Telecommunications plc’s respective standard conditions of contract.

Nothing in this publication forms any part of a contract.

Registered Ofﬁce: 81 Newgate Street, London EC1A 7AJ.

Registered in England No. 1800000.

Designed and produced by The Art & Design Partnership Ltd.

Printed in China / Issue 3 / ADP10-14

98%

For a Better Future

We’re always looking to make our products last longer

and use less power, so we don’t have such a big impact

on the environment.

To ﬁnd out about what we are doing, visit

bt.com/betterfuture

1 Plug in

2 Charge

3 Go!

If you’d like further help, or to view the full user guide, please visit our website

bt.com/producthelp or call our helpdesk on 0800 145 6789*

* Calls made from within the UK mainland network are free. Mobile and International call costs may vary.

User Guide

Minimum:

H: 12mm

W: 26.523

Belt clip

(pre-installed)

Screws and plugs

Belt clip

(pre-installed)

Charger Long range

antenna

Place the large base close enough to a mains power and telephone socket so that

the cables will reach. Make sure it is at least 1 metre away from other electrical

appliances to avoid interference.

The strength of the signal depends on where you site the base. Putting the base

unit as high as possible can help provide the best signal/range.

The BT Elements 1K charger can be located wherever you want, provided it’s within

reach of a mains power socket.

Screws and plugs

Long range

antenna

BT Elements 1K

Digital Cordless Phone with Answer Machine

Setting up is easy. Just follow the simple steps in this guide.

BT Elements 1K Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BT Elements 1K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info