Bedienungsanleitung BT Synergy 5100 (Seite 1 von 2) (Englisch)

650216

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

User Guide

BT Synergy 5100

Ofces worldwide

The services described in this publication are subject to availability and may be

modied from time to time. Services and equipment are supplied subject to

British Telecommunications plc’s respective standard conditions of contract.

Nothing in this publication forms any part of a contract.

Registered Ofce: 81 Newgate Street, London EC1A 7AJ.

Registered in England No. 1800000.

Designed and produced by The Art & Design Partnership Ltd.

Printed in China / Issue 2 / ADP08-08

1 Plug in

2 Charge

3 Go!

General information

For information on safety instructions,

cleaning, technical information or

connecting to a switchboard, please

refer to the ‘General Information’

section in the full user guide at

www.bt.com/producthelp

Guarantee

Your BT Synergy 5100 is guaranteed for a period of 12

months from the date of purchase.

Subject to the terms listed below, the guarantee

will provide for the repair of, or at BT’s or its agent’s

discretion the option to replace the BT Synergy 5100,

or any component thereof, (other than batteries),

which is identied as faulty or below standard, or as a

result of inferior workmanship or materials. Products

over 28 days old from the date of purchase may be

replaced with a refurbished or repaired product.

The conditions of this guarantee are:

• The guarantee shall only apply to defects that

occur within the 12 month guarantee period.

• Proof of purchase is required.

• The equipment is returned to BT or its agent

as instructed.

This guarantee does not cover any faults or defects

caused by accidents, misuse, fair wear and tear,

neglect, tampering with the equipment, or any

attempt at adjustment or repair other than through

approved agents.

This guarantee does not affect your statutory rights.

For further information within and outside the 12

month guarantee, please refer to the full user guide at

www.bt.com/producthelp

Product disposal instructions

The symbol shown here and on the product

means that the product is classed as Electrical or

Electronic Equipment and should not be disposed with

other household or commercial waste at the end of its

working life.

The Waste of Electrical and Electronic Equipment

(WEEE) Directive (2002/96/EC) has been put in place

to recycle products using best available recovery and

recycling techniques to minimise the impact on the

environment, treat any hazardous substances and

avoid the increasing landll.

Product disposal instructions for residential users

When you have no further use for it, please remove

any batteries and dispose of them and the product as

per your local authority’s recycling processes. For more

information please contact your local authority or the

retailer where the product was purchased.

Product disposal instructions for business users

Business users should contact their suppliers and check

the terms and conditions of the purchase contract

and ensure that this product is not mixed with other

commercial waste for disposal.

R&TTE Directive & Declaration

of Conformity

This product is intended for use within the UK for

connection to the public telephone network and

compatible switchboards.

This equipment complies with the essential

requirements for the Radio Equipment and

Telecommunications Terminal Equipment Directive

(1999/5/EC).

The Declaration of Conformity is published on

the website www.sgwglobal.com/bt

Setting up is easy. Just follow the simple steps in this guide.

If you need further assistance, please visit our website www.bt.com/producthelp

to view our advanced user guide or call our helpdesk on 0800 145 6789*

2 Charge

1 Make sure the battery ribbon is laying at inside the

compartment and insert the two batteries supplied observing

the polarity markings (+ and -).

2 Attach the battery compartment cover by sliding the ends into

the holes inside the compartment, pressing down and pushing the

other end along until it clicks into place.

3 Place handset on base to charge.

4 After 24 hours, plug the telephone line cord into the telephone wall socket.

Important: Charge the handset batteries for 24 hours

or your phone may not work.

Set up your additional handsets (multipacks only)

1 For additional handsets and chargers: plug the mains power adaptor with the

red connector (item code 032765) into the back of the charger and plug the

other end into the mains wall socket and switch the power on.

2 Insert the batteries as shown above.

3 Place handset on the charger to charge for 24 hours.

If you ever need to remove the batteries, simply slide open the battery

compartment cover and pull the ribbon away from the handset to release

the batteries.

Your BT Synergy 5100 is now ready for use.

1 Plug in mains power adaptor with

the clear plug (item code 040497).

2 Plug the other end of the power

adaptor into the wall socket and

switch on.

3 The telephone line cord is pre-

installed, don’t plug the other end

into the wall socket yet.

Important: Only use the cables and rechargeable batteries supplied in this box,

or this product may not work. Any replacement rechargeable batteries must be

of the same type.

Check box contents

Handset

Handset Charger

Mains power adaptor

(item code 040497)

Mains power adaptor

(item code 032765)

Telephone line

cord

2x AAA Ni-MH

rechargeable batteries

2x AAA Ni-MH

rechargeable batteries

Base

Contents for each additional handset (multipacks only)

1 Plug in

* Calls made from within the UK mainland network are free. Mobile and International call costs may vary.

BT &

Working together, supporting energy saving products

BT & British Gas have joined forces to help our customers nd new ways to save energy

around the home, so we can all do our bit for the environment & save money too!

Please

turn

over

BT Synergy 5100 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BT Synergy 5100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info