Bedienungsanleitung BT Synergy 5100 (Seite 2 von 2) (Englisch)

650216

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

SIM card reader

Make sure your phone numbers are stored on the SIM card and not just on the

mobile itself, otherwise copying will not work.

Use your SIM card reader/writer to automatically copy numbers from your mobile to

your BT Synergy 5100 and vice versa.

1 Slide out the SIM drawer on the base and

insert your SIM card.

2 At the handset, press

NAMES

. Scroll to

COPY

PHONEBOOK

, press

SELECT

3 Scroll

to either

FROM

SIM

press

SELECT

4 If requested, enter your SIM PIN, press

The numbers will start copying.

Text messaging

Before sending and receiving text messages you need to register to the text

messaging service and subscribe to Caller Display. You will be automatically

registered to the text message service when you send your rst text. See the full

user guide online at www.bt.com/producthelp for details.

3 Go!

Set date and time

Press

, scroll to

CLOCK

ALARM

, press

SELECT

DATE

TIME

is displayed, press

SELECT

Enter date using format DD/MM/YY, press

SAVE

Enter time and press

SAVE

Making calls

Press then dial the phone number. Press to end the call.

Answering calls

If you have subscribed to Caller Display, the caller’s details will be displayed before you

answer (see the full user guide online at www.bt.com/producthelp for details.)

Lift the handset from the base or charger to answer incoming calls (auto talk, see below).

If the handset is not on the base or charger, press

Auto talk is set to On as the default. If you lift the handset to answer

and then press

the loudspeaker will be activated.

Handsfree

Press

during a call to switch call to loudspeaker.

Secrecy

Press

SECRECY

during a call to activate secrecy mode. Press

OFF

to resume your call.

Redial

Press

, then scroll or to choose the number you want. Press to redial

the number.

Phonebook

Use your SIM card reader to automatically copy numbers from your mobile –

see opposite.

Storing new phonebook entries manually (up to 250)

Press

NAMES

is highlighted. Scroll to

ADD

ENTRY

, press

SELECT

Enter the name and press

. You may need to press the same button a few times until

the letter you want is displayed. For example, press 2 once for

, or twice for

Enter the number and press

SAVE

Scroll

or to choose the ringtone you want, press

SELECT

Display shows

<NAME>

SAVED

Dialling a phonebook entry

Press

, then scroll or to the entry you want. Press to dial the number.

Caller Display and the calls lists

You must subscribe to a Caller Display service for this feature to work. Your network

provider may charge you for this service.

View and dial from a calls list

Press

MENU, scroll to CALLS LISTS, press SELECT.

Press

or to choose between MISSED CALLS, RECEIVED CALLS or DIALLED

CALLS and press SELECT.

Press

or to scroll through the list. Press OPTIONS, SHOW DETAILS

is highlighted.

Press

SELECT to see the caller’s details or press DIAL to call the number.

Press

BACK to return to the previous menu level.

Help

Most problems can be xed with a few simple checks.

Problem Solution

No dial tone Only use the cables and batteries supplied.

Make sure both the mains power adaptor cable and

telephone line cord are plugged into the correct sockets.

Poor speech quality Make sure the product is not located too close to other

electrical appliances. This can also help improve the

handset range from the base.

Battery icon not full/

handset dead

Make sure you charge the batteries for 24 hours before use

to ensure maximum battery performance.

Using broadband on the same

phone line?

Make sure you plug the phone

into the wall socket via an ADSL

microlter (not supplied), otherwise

you may have problems with this

product and your broadband service.

Key tone not recognised when

following telephone menu

prompts, for example, during

telephone banking.

Your phone may be in ‘pulse’ dial mode rather than ‘tone’.

Please check your base settings to ensure ‘tone’ is selected

from the

DIALLINg

MODE

sub menu.

What is the base default PIN? Base default PIN = 0000

Your phone

Handset

Navigating the menus

Your BT Synergy 5100 has an easy to use menu system.

Each menu has a list of options.

When the handset is switched on and in standby:

Press

MENU to open the main menu.

Use

or buttons to scroll through the available options.

Press the

SELECT option button to select a menu option or the BACK

option button to go back to the previous screen.

To exit the menu and return to standby press

Find out more

• New Frequently Asked Questions available at www.bt.com/producthelp

• If you need more detailed instructions, a full user guide is available to

download from www.bt.com/producthelp

• If you cannot nd the answer to your problem in the full online user guide,

then please email bt.helpdesk@sgweurope.com

• Call our free Helpline on 0800 145 6789

. Our dedicated advisors are more

likely to be able to help you than the retailer where you made your purchase.

ADSL

microlter

NAMES

On screen options

Press to open/scroll

through Redial list.

Increase volume.

Scroll through options.

Select options and to

go back one screen.

Open menu and

select options.

Make/receive a call.

Switch handsfree

on/off.

Press and hold to

switch between

Tone/Pulse dialling.

Recall for use with

switchboard/PBX and

BT Calling Features.

Press to return

to standby.

Press and hold to switch

handset off/on.

Open and scroll

through Names list.

Press to reduce

volume and to

scroll down.

Press and hold to

lock the keypad.

To unlock, select

Unlock

and follow on

screen instructions.

Make internal calls.

Option buttons

Inserts a space.

BT Synergy 5100 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BT Synergy 5100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info