1 Plug in
2 Charge
3 Go!
General information
For information on safety instructions,
cleaning, technical information or
connecting to a switchboard, please
refer to the ‘General Information’
section in the full user guide at
www.bt.com/producthelp
Guarantee
Your BT Verve 410 is guaranteed for a period of 12
months from the date of purchase.
Subject to the terms listed below, the guarantee
will provide for the repair of, or at BT’s or its agent’s
discretion the option to replace the BT Verve 410, or
any component thereof, (other than batteries), which
is identied as faulty or below standard, or as a result
of inferior workmanship or materials. Products over 28
days old from the date of purchase may be replaced
with a refurbished or repaired product.
The conditions of this guarantee are:
• The guarantee shall only apply to defects that
occur within the 12 month guarantee period.
• Proof of purchase is required.
• The equipment is returned to BT or its agent
as instructed.
This guarantee does not cover any faults or defects
caused by accidents, misuse, fair wear and tear,
neglect, tampering with the equipment, or any
attempt at adjustment or repair other than through
approved agents.
This guarantee does not affect your statutory rights.
For further information within and outside the 12
month guarantee, please refer to the full user guide at
www.bt.com/producthelp
Product disposal instructions
The symbol shown here and on the product
means that the product is classed as Electrical or
Electronic Equipment and should not be disposed with
other household or commercial waste at the end of its
working life.
The Waste of Electrical and Electronic Equipment
(WEEE) Directive (2002/96/EC) has been put in place
to recycle products using best available recovery and
recycling techniques to minimise the impact on the
environment, treat any hazardous substances and
avoid the increasing landll.
Product disposal instructions for residential users
When you have no further use for it, please remove
any batteries and dispose of them and the product as
per your local authority’s recycling processes. For more
information please contact your local authority or the
retailer where the product was purchased.
Product disposal instructions for business users
Business users should contact their suppliers and check
the terms and conditions of the purchase contract
and ensure that this product is not mixed with other
commercial waste for disposal.
Warning
This equipment is not designed for making
emergency telephone calls when the power fails.
Alternative arrangements should be made for
access to emergency services.
R&TTE Directive & Declaration of Conformity
This product is intended for use within the UK for
connection to the public telephone network and
compatible switchboards.
This equipment complies with the essential
requirements for the Radio Equipment and
Telecommunications Terminal Equipment Directive
(1999/5/EC).
For a copy of the Declaration of Conformity
please refer to www.bt.com/producthelp
Setting up is easy. Just follow the simple steps in this guide.
If you need further assistance, please visit our website www.bt.com/producthelp
to view our advanced user guide or call our helpdesk on 0800 218 2182*
2 Charge
1 The battery is already tted in the handset but needs to be connected. Remove the
battery compartment cover. Locate the battery connector and plug it into the socket
inside the battery compartment (the red wire should be on the left). Tuck the battery
leads in the space above the battery and slide the battery compartment cover back on.
2 Place the handset on the base to charge for at least 20 hours. An animated
icon
will be displayed to indicate charging.
3 After 20 hours, plug the telephone line cord into the telephone wall socket.
Important: Charge the handset batteries for 20 hours
or your phone may not work.
Set up your additional handsets (multipacks only)
1 For each additional handset and charger: plug the mains power adaptor (item code
040368: black or 042169: white) through the channel at the rear of the charger
and insert the plug into the power socket. Plug the other end into the mains wall
socket and switch the power on.
2 Activate batteries as shown above.
3 Place handset on the charger to charge for 20 hours.
If you ever need to remove the battery, simply slide open the battery
compartment cover, lift the battery and unplug the connector.
Your BT Verve 410 is now ready for use.
1 The telephone
line cord is
pre-installed
but don’t plug
the other end
into the wall
socket yet.
Please
turn
over
Important: Only use the cables and rechargeable batteries supplied in this box,
or this product may not work. Any replacement rechargeable batteries must be
of the same type and are available from the BT Verve Helpline.
Check box contents
2 Plug in mains
power adaptor
(item code
045030).
3 Plug the other
end of the power
adaptor into the
wall socket and
switch it on.
Handset
Handset Charger
Mains power adaptor
(item code 045030
black or white)
Mains power adaptor
(item code 040368 -
black or 042169 - white)
Ni-MH 600mAh
rechargeable battery
(already in handset)
Ni-MH 600mAh
rechargeable battery
(already in handset)
Base
Telephone
line cord
(pre-installed)
Contents for each additional handset (multipacks only)
1 Plug in
* Calls made from within the UK mainland network are free. Mobile and International call costs may vary.
BT &
Working together, supporting energy saving products
BT & British Gas have joined forces to help our customers nd new ways to save energy
around the home, so we can all do our bit for the environment & save money too!
