697444
63
Zoom out
Zoom in
Vorherige Seite
1/84
Nächste Seite
Additional programming options
8
Logamatic 4321/4322 - Subject to technical modifications.
63
8.3 Creating a new DHW program
You may operate DHW heating either according to the factory settings "Program
select. by heat. circs" or according to your own switching program "Program
select. own DHW".
If DHW is to be heated independently of the heating circuits, you can enter your
own new DHW program as follows:
Example:
On all weekdays DHW should be heated from 06.30 until 09.00.
z Select a heating circuit (Æ Chapter 7.6).
(here: "DHW")
z Select a program for the heating circuit "DHW" (Æ Chapter 7.10).
(here: "Program select. new")
The display shows the blank screen "New switch.point" for the new switching
point.
z Enter the switching points (Æ Chapter 8.2).
Your DHW heating will no operate according to your "Own program DHW".
You can call up your new "Own program DHW" by pressing "Prog" and turning
the rotary selector (Æ Chapter 7.6).
USER INFORMATION
With the factory setting "Program select. by heat. circs", DHW heating begins
30 minutes prior to the first switching point of all heating circuits associated with
this control unit, and ends when the last heating circuit is switched off.
New switch.point
--------------
----
at ---
USER INFORMATION
Only after all three details (day/time/temperature) have been defined for the
new switching point will it be automatically saved under "Own program DHW",
and the heating circuit selection "DHW". This saving is not shown on the
display. The display shows the blank screen "New switch.point" for the next
switching point. Repeat this process for all required switching points.
63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Buderus Logamatic 4322 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info