678366
78
Zoom out
Zoom in
Vorherige Seite
1/93
Nächste Seite
Sent Unicast Packets Displays the number of sent unicast packets.
Sent Multicast Packets Displays the number of sent multicast packets.
Sent Broadcast Packets Displays the number of sent broadcast packets.
Discarded Sent Packets Displays the number of packets that could not be sent.
Sent Packet Error Displays the number of packets that was discarded because of FCS error.
Total Frames Rx Displays the number of total received EAP packets.
Total Frames Tx Displays the number of total sent EAP packets.
Start Frames Rx Displays the number of received EAPOL start packets.
Logoff Frames Rx Displays the number of received EAPOL logoff packets.
Request/ID Frames Tx
Displays the number of EAP packets that include “Code:Request(1)
Type:Identity(1)”.
Request Frames Tx
Displays the number of EAP packets that do not include “Code:Request(1)
Type:Identity(1)”.
Response/ID Frames Rx
Displays the number of EAP packets that include “Code:Response(2)
Type:Identity(1)”.
Response Frames Rx
Displays the number of EAP packets that do not include “Code:Response(2)
Type:Identity(1)”.
Invalid Frames Rx Displays the number of EAP packets whose types are invalid.
Length Error Frames Rx Displays the number of EAP packets whose packet lengths are invalid.
Last Frame Version Displays the version of the latest received EAP packet.
Last Frame Source Displays the source MAC address of the latest received EAP packet.
Notes:
When the switch is in L2 mode, packets that are designated to the switch (such as ping or http communication
for displaying Settings) will be displayed as “received unicast packets and discarded received packets.
When the switch is in L3 mode, packets that are designated to the switch are displayed as “received unicast
packets”.
The target packets of this page are MAC frames, IPv4 packets, and IPv6 packets.
Logs
Displays the switchs log information.
Notes:
Up to 512 logs can be recorded to this switch in total. If exceeded, logs will be deleted in order of oldest.
When the switch is turned off, all logs will be deleted.
Sort Select a type of log to display.
77
Chapter 2 Settings
78

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Buffalo BS-GS Series wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info