678298
108
Zoom out
Zoom in
Vorherige Seite
1/127
Nächste Seite
4 The “Confirm Operation screen will open. Enter the confirmation number, then click OK.
5 The LinkStation will be restored to its factory default settings.
Initializing with the Function Button
You can also initialize the settings with the function button.
1 Turn off the LinkStation.
2 Turn the LinkStation on while holding down the function button. The function LED will flash white.
3 Press the function button again while the LED is flashing.
4 Initialization will take 5 to 10 minutes. Do not power down the LinkStation while it is initializing and showing
the I23 information message in NAS Navigator2 and with the power LED. When initialization is finished, the
LinkStation will automatically reboot.
Notes:
The following settings will be initialized: admin username, admin password, IP address, and Ethernet frame size.
To disable initializing username and password, navigate to Management > Restore/Erase > Edit and change
“Restore factory default settings” to “Keep current settings”. Be careful with this option! If this is selected and you
lose your admin password, you will not be able to reset it.
Updating the Firmware
If a new firmware is available, a message is displayed when the LinkStation boots. You can update the firmware as
below:
1 From Advanced Settings, click Management.
2 Click to the right of “Update”.
3 Click OK.
4 Click Install Update.
5 The “Confirm Operation screen will open. Enter the confirmation number, then click OK.
Notes:
Settings is not available while the firmware is updating. Don’t try to access Settings from another computer until
the update is complete.
You can disable update notifications in Management > Update.
To clear an update notification, press the function button.
107
Chapter 8 Advanced Features
108

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Buffalo LinkStation 200 - LS210D-EU wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Buffalo LinkStation 200 - LS210D-EU

Buffalo LinkStation 200 - LS210D-EU Bedienungsanleitung - Deutsch - 134 seiten

Buffalo LinkStation 200 - LS210D-EU Bedienungsanleitung - Holländisch - 134 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info