678317
58
Zoom out
Zoom in
Vorherige Seite
1/160
Nächste Seite
58
Do not change the order of the hard drives in the TeraStation. For example, pulling out drive 1 and replacing it
with drive 2 may cause data to be corrupted or lost.
If a new drive is not recognized, click Rediscover Disk in Settings.
If two drives fail at the same time, replace and resync them one at a time.
Hard Drive Replacement Examples
Drive Replacement (using a redundant RAID mode such as RAID 1, 5, or 6 with auto-
shutdown disabled)
This section describes replacing a drive with the TeraStation on.
1 The failed drives status LED will be glowing red. Push its unlock button and swing the lock mechanism out.
2 Pull out the drive cartridge and remove it from the TeraStation.
3 Insert the new drive in the empty slot. Slide the drive in with the locking mechanism open.
4 Swing the lock back down until it clicks into place.
5 When the replacement hard drive is recognized, the status LED will flash red. The TeraStation will start rebuilding
the RAID array automatically.
Drive Replacement (using a redundant RAID mode such as RAID 1, 5, or 6 with auto-
shutdown enabled)
This section describes the process of replacing a drive while the TeraStation is off.
1 Push the unlock button of the failed hard drive and swing the lock mechanism out.
2 Pull out the drive cartridge and remove it from the TeraStation.
3 Insert the new hard drive in the empty slot. Slide the drive in with the locking mechanism open. Swing the lock
back down until it clicks into place.
4 Press the power button on the TeraStation.
5 When the replacement hard drive is recognized, the status LED will flash red.
6 The TeraStation will start rebuilding the RAID array automatically.
Drive Replacement (RAID 0 or JBOD)
Drives in a RAID 0 array or JBOD mode do not automatically turn off in the event of a malfunction. Before replacing the
failed drive, either dismount the drive from Settings, or shut down the TeraStation. This section describes the process of
replacing a drive with the TeraStation on.
1 In Settings, navigate to Drives - Drives.
58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Buffalo TeraStation 7120 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info