678317
66
Zoom out
Zoom in
Vorherige Seite
1/160
Nächste Seite
66
tion.
You can select subfolders as the replication source. Folders whose names contain more than 80 alphanumeric
characters cannot be selected.
If a “Replication I33 ReplicateFailure” error occurs, navigate to Backup - Replication and click Sync.
Don’t use the same TeraStation for both failover and replication, or replication and Time Machine.
Don’t configure replication from one source folder to multiple target folders.
If your TeraStation has more than 100 local users with an average of 8 characters or more per username, replica-
tion may fail. This bug will be fixed in a future firmware update.
Failover
With failover, two TeraStations are connected to the network for redundancy. If a problem occurs in the main TeraStation
so that it can no longer be accessed, operation is automatically switched to the backup TeraStation.
Note: Use identical model and capacity TeraStations for the main TeraStation and backup TeraStation. If the capacity
of the main TeraStation is larger than that of the backup TeraStation, a “Replication I33 ReplicationFailure error will
occur.
Ethernet Cable Connection Methods
Two different configurations for failover are available. With the first setup, if the main TeraStation fails, the backup
TeraStation will replace it completely, using the same name and IP address. The backup TeraStation is updated over
normal network traffic.
Connecting to the network at LAN port 1 and setting failover at LAN port 1
With the second setup, the backup TeraStation and main TeraStation are connected by a second Ethernet cable
connecting their LAN 2 ports. Updating is done over this dedicated network path, so updates are quicker and don’t
interfere with normal network traffic. With this setup, if the main TeraStation fails, the backup TeraStation will replace it
by name, but will keep its original IP address.
Connecting to the network at LAN port 1 and setting failover at LAN port 2
66

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Buffalo TeraStation 7120 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info