678328
102
Zoom out
Zoom in
Vorherige Seite
1/111
Nächste Seite
Hard Drive Status Cannot Be Found
If the language settings are not the same for the following options, the hard drive status such as error,
resynchronizing, or degraded may not be detected correctly. Configure the same language for these options.
• Display language
• Welcome screen and system account
• System locale
LCD Panel Displays a Different IP Address
The IP address displayed when pressing the select button is for maintenance use only and this is not the IP address
of the TeraStation.
Resynchronization Regressed When TeraStation Was
Restarted While Resynchronizing
If you restart the TeraStation while resynchronizing, the resynchronization temporarily halts and will resume after
the reboot completes. The ones place digit of the progress display will be reset to "0".
For example, if rebooted when resynchronizing has proceeded to 15%, the progress status after restarting will be
10%.
TeraStation Does Not Boot
If Windows Storage Server is not functioning properly, perform recovery using the supplied SD card.
Notice When Recovering
• This recovery procedure erases the data on the drive C. Backing up regularly is highly recommended to avoid
losing your important data. The data on drive D will be kept.
• Do not connect the SD card to another TeraStation or your computer. The recovery process that involves using
the SD card is intended for this product only.
• If the storage pool is created on drive 1, delete the storage pool before running the recovery process.
• Remove all USB devices except for the supplied SD card, a card reader, a mouse, and keyboard before recovering.
When it's completed, you can connect them back to the TeraStation.
Recovering Windows Storage Server
1 Turn off the TeraStation.
2 Insert the SD card into the card reader (not included).
3 Connect a mouse, keyboard, and the card reader to the TeraStation using a USB 3.0 or 2.0 port.
4 Connect the monitor to the TeraStation using a HDMI or VGA port.
5 Press the power button to turn the TeraStation on.
6 Press the F11 key some times until the "Please select boot device:" is displayed. When it's displayed, stop
pressing F11. If it not displayed, repeat from the step 1.
101
102

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Buffalo TeraStation WSH5000 series wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Buffalo TeraStation WSH5000 series

Buffalo TeraStation WSH5000 series Bedienungsanleitung - Deutsch - 119 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info