678327
21
Zoom out
Zoom in
Vorherige Seite
1/111
Nächste Seite
Chapter 3 Managing Storage
Creating Volumes
Notes:
• To create a RAID volume, use RAID Builder instead of the Disk Management option in Windows Storage Server.
• When volumes are deleted or formatted, or the RAID mode is changed, all data stored on the volumes is erased.
Before executing these operations, back up any important data.
• In this manual, "recover" means reverting the TeraStation (including the data) to its former state prior to the drive
failure. It doesn't refer to reading data from a failed hard drive.
Volume Types
RAID 6 Volumes
RAID 6 distributes two parity blocks when writing data. The usable space is equal to the sum of the capacity of four
drives. If two drives in a RAID 6 array fail, data on the array can be recovered after the failed drives are replaced.
However, if three or more drives fail, all data is lost.
RAID 5 Volumes
RAID 5 distributes a parity block when writing data. The usable space is equal to the sum of the capacity of five
drives. If one drive in a RAID 5 array fails, data on the array can be recovered after the failed drive is replaced.
However, if two or more drives fail, all data is lost.
RAID 10 Volumes
Mirrored pairs of drives in RAID 1 arrays are combined into a RAID 0 array. The usable space is equal to the capacity
of three drives. The same data is written to multiple drives so that if one drive from either or both RAID 1 array fails,
data on the array can be recovered after the failed drives are replaced. However, if two drives on the same RAID 1
array or three drives in total fail, all data is lost.
Striped Volumes
RAID 0 stripes data across the multiple drives, but lacks parity blocks like RAID 5 or RAID 6. The usable space is equal
to the capacity of all drives on the TeraStation. RAID 0 doesn't have any redundancy so data cannot be recovered if
even a single drive fails.
Creating a RAID Volumes
To build a new RAID array, follow the procedure below.
1 From the Windows Storage Server Start menu, click RAID Builder.
20
21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Buffalo TeraStation WSH5610 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Buffalo TeraStation WSH5610

Buffalo TeraStation WSH5610 Bedienungsanleitung - Deutsch - 119 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info