Bedienungsanleitung Bugatti Vera easy (Seite 9 von 12) (Englisch)

623971

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Make sure that the electric socket that you are using is suitably earthed.

Never allow parts carrying live voltage to come into contact with water: it may cause a short circuit!!!

(follow all the safety instructions specied before).

Be careful: never keep the on/off button (9) pushed during or after every boiling session.

Be careful: never operate the kettle without water.

Automatic shutdown

The kettle is equipped with a system that automatically switches off the device shortly after the water is

boiled.

If warm water is desired, the heating process can be stopped anytime by pulling the on/off button (9). The

shutdown takes place automatically as the kettle is removed from its base (5).

For functional reasons, some condensations may appear at the bottom of the on/off button (9), on the base

(5) and on the connector (5a). This happens for technical reasons and does not bear on the safety of the

device.

Safety system

A thermostat protects the kettle from overheating: if the device is accidentally switched on empty, this

system automatically switches off the device. The device will restart its normal functions in around 10

minutes.

If the rst thermostat protection would not function due to improper use, another temperature limiter

ensures protection.

Cleaning and maintenance

CAUTION: Always disconnect the kettle from the electrical outlet before cleaning.

Before cleaning, be sure the kettle is cold.

Clean the exterior surface of the kettle with a clean, damp cloth to preserve its original highly polished

nish. Dry and polish with a soft cloth.

Do not use abrasive cleansers or scouring agents of any kind on the interior or exterior of the kettle.

Do not immerse the kettle or power base in water or other liquid, and be sure that the electric kettle plug

(6) and connector (5a) of the power base (5) is kept dry.

a) Filter (7)

Scale, or calcium, is a natural substance that forms when hard water is boiled. The lter serves to retain

the calcium in the water kettle. It is important to clean the lter regularly. The lter clips into the spout

and can be removed by pulling it up from the spout. It can be cleaned by gently brushing with a soft brush

under running water.

ATTENTION: This operation can be performed only when the kettle is not working and when the kettle

has cooled down. DO NOT REMOVE THE FILTER WHEN VERA KETTLE IS WORKING AND WHEN THE SUFACE

IS HOT. BOILED WATER AND STEAM CAN BURN!!!

b) Decalcication

Decalcication refers to remove the calcium deposits which may form in the interior metal parts of the ket-

tle. To get the best performance from your Vera kettle, decalcify your unit from time to time. Frequency

depends on the hardness of your tap water and how often you use the kettle. Be careful: a kettle with

calcium scales needs more time to boil water. This will cause a waste of energy.

We suggest to do it or every 100-200 boiling cycles, or every two weeks or every time you see white spots

on the internal bottom surface of the kettle: it means that there is limestone sediment. We suggest the use

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bugatti Vera easy Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bugatti Vera easy

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info