Bedienungsanleitung Bulls 2020 (Seite 62 von 93) (Englisch)

779866

Zoom out

Zoom in

Vorherige Seite

1/93

Nächste Seite

MY21B03 - 32_1.0_23.12.2020 61

Cleaning and servicing

7 Cleaning and servicing

Cleaning check list

Maintenance check list

The brake system is not designed for use on a

bicycle which is placed on its side or turned upside

down. The brake may not function correctly as a

result. This can cause a crash, which may result

in injuries. If the bicycle is placed on its side or

turned upside down, apply the brake a couple of

times before setting off to ensure that it functions

normally. Servicing measures must be performed

regularly. Contact your specialist dealer if you are

unsure.

Clean the pedals after each ride

Clean the suspension fork and, if

necessary, rear frame damper after each ride

Chain (mainly tarmacked road) every

250–300 km

Basic cleaning and preservation of all

components at least every six

months

Clean and lubricate the height-adjustable

seat post every six months

Check for tyre wear once a week

Check for rim wear once a week

Check tyre pressure once a week

Check brakes for wear once a month

Check electrical cables and Bowden

cables for damage and ensure they are

fully functional once a month

Check chain tension once a month

Check tension of the spokes every three

months

Check the gear shift setting every three

months

Check suspension fork and, if necessary,

rear frame damper for wear and ensure

fully functional

every three

months

Check for wear on brake discs at least every six

months

Crash caused by brake failure

The brake system is not designed for use on a

bicycle which is placed on its side or turned

upside down. The brake may not function

correctly as a result. This can cause a crash,

which may result in injuries.

If the bicycle is placed on its side or turned

upside down, apply the brake a couple of times

before setting off to ensure that it functions

normally.

WARNING

Crash caused by brake failure

Oil or lubricant on the brake disc in a disc brake

or on the rim of a rim brake can cause the brake

to fail completely. This may cause a crash with

serious injuries.

Never allow oil or lubricant to come into

contact with the brake disc or brake linings or

on the rim of a rim brake.

If the brake linings have come into contact with

oil or lubricant, contact a dealer or a workshop

to have the components cleaned or replaced.

Apply the brakes a few times to test them after

cleaning, servicing or repair.

Notice

Water may enter the inside of the bearings if you

use a steam jet. This dilutes the lubricant inside,

the friction increases and, as a result, the

bearings are permanently damaged in the long

term.

Never clean the bicycle with a pressure

washer.

Greased parts, such as the seat post, the

handlebars or the stem, may no longer be safely

and reliably clamped.

Never apply grease or oil to clamping sections.

WARNING

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bulls 2020 Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bulls 2020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info