Bedienungsanleitung Bulls Adventure Evo - BOSCH Kiox 2020 (Seite 69 von 122) (Englisch)

779889

Zoom out

Zoom in

Vorherige Seite

1/122

Nächste Seite

MY20B01-22_1.0_21.06.2019 68

Operation

6.5 Before each ride 6.6 Check list before each ride

Check the pedelec before each ride.

Do not use the pedelec if there is evidently

something wrong with it.

Crash caused by difficult-to-spot damage

If the pedelec topples over or you have a fall or an

accident, there may be difficult-to-spot damage to

components such as the brake system, quick

releases or frame. This may cause a crash with

injuries.

Take the pedelec out of service and have a

specialist dealer carry out an inspection.

Crash caused by material fatigue

Intensive use can cause material fatigue. A

component may suddenly fail in case of material

fatigue. This may cause a crash with injuries.

Remove the pedelec from service immediately

if there are any signs of material fatigue. Have

the specialist dealer check the state.

Have the specialist dealer carry out a basic

inspection regularly. During the inspection, the

specialist dealer will inspect the pedelec for

any signs of material fatigue on the frame,

fork, suspension element mountings (if there

are any) and components made of composite

materials.

Carbon becomes brittle when exposed to heat

radiation such as heating. This can cause the

carbon part to break and result in a crash with

injuries.

Never expose carbon parts on the pedelec to

strong sources of heat.

CAUTION

Check that the pedelec is complete.

Check the battery is firmly in place.

Check that the lighting, reflector and brake, for instance,

are sufficiently clean.

You must check that the mudguards, the pannier rack and

the chain guard are securely installed.

Check that the front and rear wheels run true. This is

particularly important if the pedelec been transported or

secured with a lock.

Check the valves and the tyre pressure. Adjust as

necessary before each ride.

If the pedelec has a hydraulic rim brake, check whether the

locking levers are fully closed in their final positions.



Check the front and rear wheel brakes to make sure that

they are working properly. To do so, push the brake levers

while stationary to check whether resistance is generated

in the usual brake lever position. The brake must not lose

any brake fluid.

Check that the riding light is working.

Check for unusual noises, vibrations, smells, staining,

deformation, cracks, scores, abrasion and wear. This

indicates material fatigue.

Inspect suspension system for cracks, dents, bumps, parts

or leaking oil. Look at concealed sections on the pedelec's

lower surface.

Use body weight to compress suspension system. Adjust to

the optimum sag value if suspension is too soft.



If quick releases are used check them to make sure that

they are fully closed in their end position. If quick release

axle systems are used, make sure that all attachment

screws are tightened to the correct torque.

Be alert to any unusual operating sensations when braking,

pedalling or steering.

Check that the ABS indicator lamp lights up correctly on

pedelecs with an ABS system.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bulls Adventure Evo - BOSCH Kiox 2020 Seite 69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bulls Adventure Evo - BOSCH Kiox 2020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info