Bedienungsanleitung Bulls Cross Rider EVO - BOSCH Intuvia 2021 (Seite 35 von 113) (Englisch)

779874

Zoom out

Zoom in

Vorherige Seite

1/113

Nächste Seite

MY21B01 - 12_1.0_09.07.2020 35

Overview

Applies only to eShift with Shimano DI2 automatic hub gears.

Applies only to eShift with NuVinci H|Sync/enviolo with

Optimized H|Sync

Applies only to eShift with Rohloff E-14 Speedhub 500/14.

3.8.6 System message

The drive system monitors itself continuously and

if an error is detected, it is indicated by a system

message. The system may switch off

automatically depending on the type of error. You

will find information and a table for all system

messages in Section 6.2.

3.8.7 ABS indicator lamp

The anti-blocking system indicator lamp must light

up after the system has started up and must go

out once speed has reached about 5 km/h. If the

ABS indicator lamp remains unlit when the electric

drive system starts, the ABS is defective. An error

code on the display screen also tells the rider that

it is defective. If the indicator lamp does not go out

after you set off or it lights up while you are riding,

this means there is an error in the anti-blocking

system. The anti-blocking system is inactive in

such a case. The brake system itself remains

functional. It is only the anti-blocking system

control which no longer operates.

If the ABS indicator lamp is lit, the ABS function is

disabled.

indicator Change

Gear adjustment You can use this menu option to

make a fine adjustment to the

Shimano DI2. You'll find the

specified setting range in the gear

manufacturer's operating

instructions. Make the fine

adjustment as soon as you hear any

unusual noises from the gear shift.

This menu option is only shown

when the display is positioned in its

mount.

Gear recovery You can use this menu option to

reset the rear derailleur if it has been

detached – due to a crash or impact

against the derailleur, for example.

You will find a description of how to

reset the gear shift in the gear shift

manufacturer's operating

instructions. This menu option is

only shown when the display is

positioned in its mount.

Gear vx.x.x.x: this is the gear software version.

This menu option is only shown

when the display is positioned in its

mount. This menu option is only

shown if you have an electronic

control gear.

Table 43: Changing the system settings

indicator Change

Gear calibration This is where you can perform a

calibration on the stepless gear.

Press on the Lighting button to

confirm calibration. Then follow the

instructions. You might need to

perform calibration while riding in

the event of a fault. In such cases,

you press on the "Lighting" button

to confirm you require calibration

and then follow the instructions on

the display screen. This menu

option is only shown when the

display is positioned in its mount.

Gear vx.x.x.x: this is the gear software version.

This menu option is only shown

when the display is positioned in its

mount. This menu option is only

shown if you have an electronic

control gear.

Table 44: Changing the system settings

indicator Change

Start gear This is where you can set the start

gear. The automatic gear switch

function is switched off in

Position – –.

This menu option is only shown if

the display is positioned in its

mount.

Gear vx.x.x.x: this is the gear software version.

This menu option is only shown

when the display is positioned in its

mount. This menu option is only

shown if you have an electronic

control gear.

Table 45: Changing the system settings

Notice

The anti-blocking system indicator lamp may light

up if the front and rear wheels are rotating at

widely different speeds from one another – for

example, if the rider cycles on the rear wheel only

or if a wheel is rotating for a unusually long time

without making contact with the ground (fitting

stand). The anti-blocking system switches off in

such cases.

1Stop pedelec to reactivate the anti-blocking

system.

2Restart pedelec (turn off and on again).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bulls Cross Rider EVO - BOSCH Intuvia 2021 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bulls Cross Rider EVO - BOSCH Intuvia 2021

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info