Bedienungsanleitung Bulls Cross Rider EVO - BOSCH Intuvia 2022 (Seite 138 von 234) (Englisch)

779872

138

Zoom out

Zoom in

Vorherige Seite

1/234

Nächste Seite

MY22B01 - 12_1.0_26.08.2021 137

Cleaning and servicing

7.1 Before each ride

Complying with these cleaning instructions is the

only way to reduce wear on components, increase

the operating hours and guarantee safety.

7.1.1 Checking the guards

The chain or belt guards, mudguards or the motor

cover can break off and go missing when the

pedelec is transported or parked outside.

Check that all guards are in place.

7.1.2 Checking the frame

Check frame for cracks, warping and damage

to the paintwork.

If there are any cracks, warping or damage to

the paintwork, remove the pedelec from

service. Contact specialist dealer.

7.1.3 Checking the fork

Check fork for cracks, warping, tarnished

components, leaked oil and damage to the

paintwork. Also look at hidden parts on the

underside.

If there are any cracks, warping, tarnished

components, leaked oil or damage to the

paintwork, remove the pedelec from service.

Contact specialist dealer.

7.1.4 Checking the rear frame damper

Check rear frame damper for cracks, warping,

tarnished components, leaked oil and damage

to the paintwork. Also look at hidden parts on

the underside.

If there are any cracks, warping, tarnished

components, leaked oil or damage to the

paintwork, remove the pedelec from service.

Contact specialist dealer.

7.1.5 Checking the pannier rack

1Hold onto pedelec by its frame. Hold onto

pannier rack with the other hand.

2Move the pannier rack backwards and

forwards to check that all screw connections

are firmly in place.

Tighten loose screws.

Attach loose baskets permanently with a

basket bracket or cable ties.

7.1.6 Checking the guards

1Hold onto pedelec by its frame. Hold onto

mudguard rack with the other hand.

2Move the mudguard backwards and forwards

to check that all screw connections are firmly in

place.

Tighten loose screws.

7.1.7 Checking wheel concentricity

Lift the front and rear wheels one after the

other. and spin each wheel when lifted.

If the wheel is loose or is crooked when it turns,

take pedelec out of service. Contact specialist

dealer.

7.1.8 Checking the quick releases

Check quick releases to ensure that all quick

releases are firmly in their fully closed end

position.

If a quick release is not firmly in its closed end

position, open quick release and place in its

end position.

If the quick release cannot be firmly placed in

its end position, take pedelec out of service.

Contact specialist dealer.

7.1.9 Checking the suspension seat post

Deflect and let the suspension seat post

rebound.

If you hear unusual noises when the

suspension seat post deflects and rebounds,

or it yields without any resistance, take pedelec

out of service. Contact specialist dealer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bulls Cross Rider EVO - BOSCH Intuvia 2022 Seite 138

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bulls Cross Rider EVO - BOSCH Intuvia 2022

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info