779872
174
Zoom out
Zoom in
Vorherige Seite
1/234
Nächste Seite
MY22B01 - 12_1.0_26.08.2021 173
Maintenance
8.5.1 Servicing the frame
1Check frame for cracks, warping and damage
to the paintwork.
If there are any cracks, warping or damage to
the paintwork, remove the pedelec from
service. New frame as specified in the parts
list.
8.5.1.1 Servicing the carbon frame
You need to distinguish between scratches on
the paintwork and impacts if the carbon frame
paintwork is damaged.
Ask customer what caused the damage.
Examine damage with a magnifying glass to
see if fibres are permanently damaged.
Damage to paintwork
1Gently sand paintwork damage with 600-grit
sandpaper.
2Smooth edges.
3Apply one or two coats of repair paint.
Damage from impact
There may be damage to the laminate beneath the
paintwork in the case of impact damage. The
frame may break even under light stress.
1Take pedelec out of service.
2Send frame to a fibre composite repair
company or purchase new frame as specified
in the parts list.
8.5.2 Checking the pannier rack
Scratches, cracks and breaks may appear on the
pannier rack caused by the panniers and cargo
boxes.
1Examine pannier rack for scratches, cracks
and breaks.
Replace damaged pannier racks.
If the paint protection film is missing or has
worn away, affix a new paint protection film.
8.5.3 Servicing axle with quick release
1Undo quick release.
2Fasten quick release.
3Check the position and clamping force of the
quick release lever.
Crash caused by unfastened quick
release
A faulty or incorrectly installed quick release may
become caught in the brake disc and block the
wheel. This will cause a crash.
Install the front wheel quick release lever on
the opposite side to the brake disc.
Crash caused by faulty or incorrectly
installed quick release
The brake disc becomes very hot during
operation. Parts of the quick release may become
damaged as a result. The quick release comes
loose. This will cause a crash with injuries.
The front wheel quick release lever and the
brake disc must be situated on opposite sides.
Crash caused by incorrectly set clamping
force
Excessively high clamping force will damage the
quick release and cause it to lose its function.
Insufficient clamping force will cause a
detrimental transmission of force. The
suspension fork or the frame may break. This will
cause a crash with serious injuries.
Never fasten a quick release using a tool (e.g.
hammer or pliers).
Only use the clamping lever with the specified
set clamping force.
CAUTION
!
174

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bulls Cross Rider EVO - BOSCH Intuvia 2022 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Bulls Cross Rider EVO - BOSCH Intuvia 2022

Bulls Cross Rider EVO - BOSCH Intuvia 2022 Bedienungsanleitung - Deutsch - 231 seiten

Bulls Cross Rider EVO - BOSCH Intuvia 2022 Bedienungsanleitung - Holländisch - 233 seiten

Bulls Cross Rider EVO - BOSCH Intuvia 2022 Bedienungsanleitung - Französisch - 234 seiten

Bulls Cross Rider EVO - BOSCH Intuvia 2022 Bedienungsanleitung - Italienisch - 236 seiten

Bulls Cross Rider EVO - BOSCH Intuvia 2022 Bedienungsanleitung - Spanisch - 237 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info