779937
70
Zoom out
Zoom in
Vorherige Seite
1/105
Nächste Seite
MY20B05-42_1.0_18.07.2019 69
Operation
6.13.5.4 Setting the clock
Configure the clock settings. First set the hours
and then the minutes. You can change the values
quickly by keeping the long assistance lever or
the short assistance lever pressed down.
The settings menu is open.
Push the long assistance lever or short
assistance lever briefly repeatedly until
CLOCK is displayed.
Press the button (display).
The set time is displayed. The hour indicator is
highlighted.
Push the long assistance lever or the short
assistance lever repeatedly until the required
hour is displayed.
Press the button (display).
The minute indicator is highlighted.
Push the long assistance lever or short
assistance lever repeatedly briefly until the
required minute is displayed.
Press the button (display).
The display screen switches back to the start
screen.
6.13.5.5 Setting the start-up transmission
When the start-up [Start mode] is enabled, the
selected start-up transmission is used when the
pedelec is started. The transmission may
automatically shift to the pre-set gear if you set off
after being stationary.
The settings menu is open.
Push the long assistance lever or short
assistance lever briefly repeatedly until
START MODE is displayed.
Press the button (display).
You will see two selection options:
Push the long assistance lever or the short
assistance lever repeatedly until the required
setting is highlighted.
Press the button (display).
The selected start-up transmission is
activated.
The display screen switches back to the start
screen.
6.13.5.6 Changing the backlight
The settings menu is open.
Push the long assistance lever or short
assistance lever briefly repeatedly until
BACKLIGHT is displayed.
Press the button (display).
You will see three selection options:
Push the long assistance lever or the short
assistance lever briefly until the required
function is highlighted.
Press the button (display).
The light settings have been changed.
The display screen switches back to the start
screen.
6.13.5.7 Changing the brightness
The settings menu is open.
Push the long assistance lever or short
assistance lever briefly repeatedly until
BRIGHTNESS is displayed.
Press the button (display).
You can choose from 5 brightness options.
Push the long assistance lever or the short
assistance lever briefly until the required
function is highlighted.
Press the button (display).
The brightness has been changed.
The display screen switches back to the start
screen.
Screen display Function
OFF Start-up transmission deactivated
[1 - 11] Gear 1 - 11
Table 43: Start-up transmission change options
Screen display Function
ON Light always on.
OFF Light always off.
MANUAL Is switched on and off with the battery-
powered light
Table 44: Light change options
70

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bulls Ebikes Shimano 6100 - 2020 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Bulls Ebikes Shimano 6100 - 2020

Bulls Ebikes Shimano 6100 - 2020 Bedienungsanleitung - Deutsch - 106 seiten

Bulls Ebikes Shimano 6100 - 2020 Bedienungsanleitung - Holländisch - 107 seiten

Bulls Ebikes Shimano 6100 - 2020 Bedienungsanleitung - Französisch - 108 seiten

Bulls Ebikes Shimano 6100 - 2020 Bedienungsanleitung - Italienisch - 110 seiten

Bulls Ebikes Shimano 6100 - 2020 Bedienungsanleitung - Spanisch - 111 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info