779893
43
Zoom out
Zoom in
Vorherige Seite
1/139
Nächste Seite
MY21B01 - 22_1.0_10.09.2020 43
Assembly
5 Assembly
Assemble the pedelec in a clean, dry
environment.
The work environment temperature should be
between 15 °C and 25 °C.
The fitting stand used must be approved for a
maximum weight of at least 30 kg.
5.1 Required tools
The following tools are required to assemble the
pedelec:
5.2 Unpacking
The packaging material consists mainly of
cardboard and plastic film.
The packaging has to be disposed of in
accordance with the regulations of the
authorities.
5.2.1 Scope of delivery
Pedelecs are fully assembled in the factory for
test purposes and then dismantled for
transportation.
The pedelec is 95 - 98 % pre-assembled. The
scope of delivery includes:
the pre-assembled pedelec
the front wheel
the pedals
quick release (optional)
the charger
the operating instructions.
The battery is supplied separately from the
pedelec.
5.3 Commissioning
Only trained specialist staff may perform initial
commissioning since initial commissioning of the
pedelec requires special tools and specialist
knowledge.
Experience has shown that a pedelec which has
not yet been sold is automatically handed to
customers as soon as it appears ready to ride.
For this reason, every pedelec must be
prepared, so it is fully ready for use
immediately after being assembled.
The assembly report (see Section 11.2)
describes all safety-relevant inspections, tests
and maintenance tasks. All assembly work
must be completed to ensure the pedelec is
ready to ride.
Complete an assembly report for quality
assurance purposes.
Risk of eye injury
Problems may arise if the settings are not made
to components correctly and you may sustain
serious injuries as a result.
Always wear safety glasses to protect your
eyes during assembly.
Crash and crushing hazard caused by
unintentional activation
There is a risk of injury if the drive system is
activated unintentionally.
Remove the battery.
•Knife
Hexagon socket spanner 2 (2.5 mm, 3 mm,
4 mm, 5 mm, 6 mm and 8 mm)
Torque wrench with working range between
5and 40Nm
Twelve-point square socket T25
Ring spanner (8 mm, 9 mm, 10 mm), 13 mm,
14 mm and 15 mm) and
Cross, flat head and ordinary screwdriver.
WARNING
!
CAUTION
!
Burns from hot drive
The drive cooler can become extremely hot
during use. Touching it may cause burns.
Leave the drive unit to cool before assembly.
CAUTION
!
43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bulls Iconic EVO - BOSCH Kiox 2021 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Bulls Iconic EVO - BOSCH Kiox 2021

Bulls Iconic EVO - BOSCH Kiox 2021 Bedienungsanleitung - Deutsch - 145 seiten

Bulls Iconic EVO - BOSCH Kiox 2021 Bedienungsanleitung - Holländisch - 141 seiten

Bulls Iconic EVO - BOSCH Kiox 2021 Bedienungsanleitung - Französisch - 144 seiten

Bulls Iconic EVO - BOSCH Kiox 2021 Bedienungsanleitung - Italienisch - 145 seiten

Bulls Iconic EVO - BOSCH Kiox 2021 Bedienungsanleitung - Spanisch - 143 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info