Bedienungsanleitung Burley D-lite 1996-2003 (Seite 11 von 12) (Englisch)

632516

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Using the Recessed Helmet Pocket

The helmet pocket on the child seat is designed to provide added

room for the back side of a child's helmet. The seatback can be

modified by making the following adjustments:

• Loosen tension on upper buckle strap (B) located behind child

seat (illustration p. 10).

• Connect/tighten lower buckle strap (A) located behind child

seat (illustration p. 10).

The size and shape of the helmet pocket can be adjusted by adding/

subtracting tension from the upper buckle strap (B).

Using the Child Seat Divider

This feature is designed to provide additional comfort and structure

to the child seat by limiting two passengers from sliding to the center

of the seat.

• Connect center crotch strap O-ring to snap hook located on the

front splash guard.

• Seat divider strap tension can be adjusted using the plastic

slider on the crotch strap.

NOTE: We recommend that the Child Seat Divider feature be used when

transporting two (2) passengers only. Single passenger loads require

placing child in the center of the seat and use of the center crotch strap as

part of the safety harness.

VIII. Completing Assembly

At this time your trailer is nearly assembled. Snap the fabric tail gate

and splash guard to the upper snap studs on the side rails if you

haven’t already done so. NOTE: It’s easier to snap these when the

trailer is folded; they can remain snapped in place during folding

and unfolding.

The elastic bungee cord is handy for securing odd-sized loads. When

not in use, carry it by hooking it across the side rails in back. The

bungee cord is also intended to be used for strapping down the tongue

and hitch when the trailer is folded, to prevent the tongue from moving.

Pull it across the tongue and hook it to the bolts on the inner frame (near

the rear of the trailer).

X. Trailer Maintenance and Care

Hitch and Tongue Maintenance

Your trailer is designed for low maintenance and easy care. Clean

and grease the eyebolt threads on the hitch periodically to ensure

that the eyebolt knob can be properly tightened.

Because of ultraviolet degradation, we recommend that the hitch be

replaced every five years under normal use. In sunny or smoggy

locations or for trailers that are stored outdoors, the hitch should be

replaced every two to three years for safety. Replace your hitch or

tongue if there are any signs of damage—i.e., cracks, dents, scratches.

Your Burley d’lite trailer comes with an easy-to-lubricate tongue-

pivot spindle. Lubricate twice a year for normal use and monthly for

heavier use—i.e., use in wet or salty conditions.

1. Gently remove inner cap on the end of tongue

with a medium flat-blade screwdriver.

2. Using grease gun equipped with needle type

injector, squirt grease into small hole in brass

bushing until old grease flushes out ends of

bushing.

3. Replace inner cap on end of tongue to protect

pivot bushing from dirt and moisture.

IMPORTANT: For any spindle service other than lubrication, con-

tact your Burley Dealer.

Fabric Care

Your Burley d’Lite is manufactured from a tough, durable pack-

cloth. The nylon fabric is coated for waterproofness and is highly

resistant to fading. The fabric can be easily cleaned with any mild

soap or detergent and warm water. For more persistent soil, use a

nylon bristle brush. When not in use, store your trailer in a dry, well-

ventilated area; wipe it dry before storing to help avoid mildew.

Nylon fabric will eventually fade, especially when exposed to direct

sunlight. To extend the life of your fabric, as well as the hitch and

other components, do not store your trailer in direct sunlight. Do not

use bleach for cleaning, as it will damage the nylon. The nylon fabric

is an important part of your trailer’s structure, and provides a safety

envelope for child passengers. Replace any nylon fabric that is

ripped, scuffed, or otherwise damaged.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Burley D-lite 1996-2003 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info