Bedienungsanleitung Bury Comfort Vision 9011 (Seite 33 von 34) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

607734

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

3336

Installation and handling of the components

Step 1:

Step 2:

Step 3:

Step 4:

CV 9011-Step 5:

First of all, please choose the most convenient position for the monitor and the installation pad

in your vehicle by attaching the monitor to the padand checking different positions in the

vehicle. It is very important to observe impact areas for occupants(amongst others the airbag

zone), surface consistency (depending on the type of fastening), free sight to the monitor (no

impaired sight out of the windshield), removability of the monitor from the installation padaswell

as to aconvenient possibility for placing the cable.

After having found asuitable position for the monitor in the vehicle you can mount /attach the

installation padaccordingly.Please use the enclosed cleaning cloth for degreasing the

surfaces you want to attach the retainer to. Please note that in case of high variations in

temperature -depending on the structure and the features -decolorizations of the surfaces can

occur during the subsequent utilization.

Connect the microphone to the leftside of the monitor.Ifpossible, please pass the cable in a

way that it does not lie or hang about unfastened in the vehicle and that it may not influence the

conducting of the vehicle.

When passing the cable, please take care that it is not under traction stress but that it has some

tolerance. Avoid crushing the cable as damages of the insulation can be caused by

friction/rubbing.

Depending from the vehicle type and itsequipment (e.g. airbags), it is reasonable to install the

microphone either at the A-pillar,atthe sun shield or at the roof interior.For details about the

equipment features please refer to the documentsofthe vehicle. Please also observe the notes

on distances to other componentsand to the driver /speaker,asspecified in the installation

manual.

Insert the cigarette lighter plug in the cigarette lighter jack in order to establish the power supply.

If possible, please pass the cable in away that it does not lie or hang about unfastened in the

vehicle and that it may not influence the conducting of the vehicle.

Install the steering wheel remote control (SWRC) as described in the mounting guidelines. In

delivery status the SWRC control is not paired with the hands-free car kit. Please call the sub-

menu 'Remote control pairing' (by pressing key 1and pressing key 6four times) at the hands-

free car kit. When pressing key 2amessage appears which recommends pressing keys 7and 3

on the SWRC simultaneously.Proceed for at least 3seconds. The SWRC is now paired with the

HFCK and ready for use. By pressing key 5twice (or the call termination key on the SWRC) you

return to the main mask.

Under the sub-item 'SW-Version' the version number of the currently uploaded system software

is displayed.

The language of the menu navigation can be changed under the sub-item 'Language'. Several

languages are at your disposal there. If you operate the hands-free set for the first time, the

preset menu language is English. In order to change the menu language, please perform the

following steps:

Please press key 1once and then consecutively key 6until the menu item "language" is

displayed. Then press key 2once to access the submenu. The current menu language will then

be displayed. By pressing key 6several times you can now scroll to the language you want to

use in future. Youcan scroll back by pressing key 1. If you want to select alanguage, please

press key 2. By pressing key 5several times you return to the main mask.

In order to be able to use the voice dialing functions of your mobile phone with the hands-free

set, you must correspondingly have identified the phone number in your mobile phone in

advance. In most cases you can only include voice tags in the directory of your mobile phone for

phone numbers already stored. In order to call up the voice tagfunction at the hands-free set

please press key 2inthe main mask for 3seconds. Please announce now the call identity of the

desired partner.

(1) =Entering into the menu

(6) =Connecting to the mobile phone connected last

Other keys =nofunction

(1) =Entering into the menu

(2) =Calling up the list of numbers dialed

(3/4) =Volume control key =volume turn up/down

Please note: The volume adjustment of the mobile phone is adopted by the hands-free

set. If e.g. the option "silent" is activated (all acoustic signals are deactivated), no call

signal is heard from the loudspeakers of the hands-free set. It depends on the paired

mobile phone whether the HFCK issues acall sign. In addition, the volume of some

mobile phones should not been switched to maximum in order to avoid echo problems

at the hands-free car kit.

(5) =nofunction

(6) =Input of phone numbers

The middle and the lower line indicate the phone number entered (max. 30 characters).

(1) =Deletion of the last cipher

(2) =Dialing number

(3) =Count down last cipher

(4) =Count up last cipher

(5) =Exit menu

(6) =Entering the next cipher

Use of voice tags:

Functions of the keys (x) during operation by pressing shortly:

No mobile phone is connected, stand-by:

Amobile phone is connected, no call/menu is active:

Amobile phone is connected, input of phone numbers:

Bury Comfort Vision 9011 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info