Bedienungsanleitung Bushnell TROPHY CAM XLT 119435 (Seite 11 von 101) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

559497

Zoom out

Zoom in

Vorherige Seite

1/101

Nächste Seite

20 21

Using the tripod socket: The camera is equipped with a socket at the

bottom end to enable mounting on a tripod or other mounting accessories

with a standard1/4-20 thread.

Two optional mounting accessories, a “Bear Safe” metal camera box

(model # 19653C) and Deluxe Tree Bracket (model# 119652C) are also

available-please see your Bushnell dealer or website for more details.

Sensing Angle and Distance Test

To test whether the Trophy Cam can effectively monitor the area you

choose, this test is recommended to check the sensing angle and monitoring

distance of the Trophy Cam. To perform the test:

• Switch the Trophy Cam to the SETUP mode.

• Make movements in front of the camera at several positions within

the area where you expect the game or subjects to be. Try different

distances and angles from the camera.

• If the motion indicator LED light blinks, it indicates that position can be

sensed. If it does not blink, that position is outside of the sensing area.

The results of your testing will help you ﬁnd the best placement when

mounting and aiming the Trophy Cam. The height away from the ground for

placing the device should vary with the animal size appropriately. In general,

3 to 6 feet is preferred.

You can avoid potential false triggers due to temperature and motion

disturbances in front of the camera by not aiming it at a heat source or nearby

tree branches or brush (especially on windy days).

Switching ON the Camera

Once you switch to the ON mode, the motion indicator LED (red) will blink

for about 10 seconds. This gives you time to close and lock the front cover of

the Trophy Cam and then walk away. During this time, the motion indicator

LED will blink red continuously. After it stops blinking, the PIR is active, and

any motion that is detected by it will trigger the capture of photos or videos

as programmed in the SETUP Menu. Be sure you have read the descriptions

of the Capture Number, Video Length, Interval and Sensor Level parameters.

Please note, the PIR is strongly sensitive to ambient temperature. The greater

the temperature difference between the environment and your subject, the

farther the possible sensing distance. The average sensing distance is about

45 ft.

Before leaving the camera unattended, please check for the following:

• Are the batteries or DC power supply inserted/connected with correct

polarity and is the power level is sufﬁcient?

• Does the SD card have sufﬁcient available space and is its write-

protection (lock) switch off?

• Is the Power switch in the ON position? (do not leave it in SETUP).

PLAYING BACK/DELETING THE PHOTOS/VIDEOS

After you have setup, mounted and activated your Trophy Cam, you will of

course be eager to return later and review the images it has captured for

you. There are several different ways this can be done.

Reviewing Images on the Trophy Cam LCD (Models with Color Viewer only)

• Put the power switch in SETUP mode (switch to OFF ﬁrst).

• Push the OK(Replay) key to enter image review mode.

• Use the UP/DOWN keys to scroll through your photos or videos. The

right corner of the display will indicate “JPG” for still photos, and a ﬁlm

icon for video ﬁles. Press the RIGHT(Shot) key to review a video.

• Push MENU to delete an image. Image delete mode works as

described below. To exit image review mode, press the OK key.

Reviewing Images on an External Video Monitor

A TV monitor can also be used to play back pictures (or videos) from the

device. Connect a TV monitor or a viewing device (such as a digital picture

frame) that has a standard composite video input (RCA jack) to the Trophy

Cam ‘s “TV Out” mini jack using the supplied cable. Then:

• Put the power switch in SETUP mode (switch to OFF ﬁrst).

• Press the OK key. The most recently captured image will be shown

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bushnell TROPHY CAM XLT 119435 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info