Bedienungsanleitung BW Panorama (Seite 13 von 157) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

549160

Zoom out

Zoom in

Vorherige Seite

1/157

Nächste Seite

or press and hold voice for five seconds to exit from

Setup Mode.

Note: Subwoofer distance should be set to reflect its

approximate distance from the listening position.

4.2 The Room Menu

The ROOM menu enables the selection of one of three

preset room setups (Preset 1 is the default selection

when Panorama is first switched on) or configuration of

a user defined room setup. The user defined room

setup parameters are distance (DIST), centre offset

(OFFSET) and side wall reflection compensation

(WALLS).

To select one of the room menu presets, press and hold

voice to enter Setup Mode. Press – to select ROOM and

press mode to enter the selection menu (the current

setting will be displayed). Press + or – to select

alternative presets followed by voice to save the

selection and return to the ROOM menu, or press and

hold voice for five seconds to exit from Setup Mode.

Note: The centre offset, distance and wall type settings

for each of the room menu presets is shown in

Figure 13.

To configure and select the user defined room setup,

press mode from the ROOM menu followed by – to

select CUSTOM and mode again to select the DIST

parameter. DIST refers to the distance from Panorama

to the listening position. Press mode to enter the

adjustment menu (the current setting will be displayed)

followed by + or – to adjust the distance. Press voice

to save the adjustment and return to the DIST menu.

menu (the current setting will be displayed). Press + or

– to adjust the bass level as required followed by voice

to save the adjustment and return to the TONE menu.

Alternatively, press and hold voice for five seconds to

exit from Setup Mode.

To adjust the treble, press mode from the TONE menu

followed by + to select TREBLE, then mode again to

enter the adjustment menu (the current setting will be

displayed). Press + or – to adjust the treble level as

required followed by voice to save the adjustment and

return to the TONE menu. Press voice to return to the

SOUND menu or press and hold voice for five seconds

to exit from Setup Mode.

To adjust the bass equalisation press mode from the

SOUND menu followed by – to select BASS.EQ then

mode again to enter the adjustment menu (the current

setting will be displayed). Press + or – to select WALL or

TABLE as appropriate followed by voice to save the

selection and return to the BASS.EQ menu. Press voice

to return to the SOUND menu or press and hold voice

for five seconds to exit from Setup Mode.

Note: Bass equalization adjusts Panorama bass

response to suit wall and table mounting.

To adjust the subwoofer setup, press mode from the

SOUND menu followed by + to select SUB then mode to

enter the LEVEL menu and mode again to enter the

adjustment menu (the current setting will be displayed).

Press + or – to adjust the subwoofer volume level as

required followed by voice to save the selection and

return to the SUB menu. Press voice to return to the

SUB menu or press and hold voice for five seconds to

exit from Setup Mode.

Note: Subwoofer level adjusts the volume of a

subwoofer connected to Panorama relative to the

volume of the other channels.

To adjust the subwoofer distance, press mode from the

SUB menu followed by + to select DIST, then mode

again to enter the adjustment menu (the current setting

will be displayed). Press + or – to adjust the distance as

appropriate followed by voice to save the adjustment

and return to the SUB menu. Press voice to return to

the SOUND menu then – to select the next setup menu,

4. PANORAMA SETUP

Using Panorama’s default setup is likely to provide good

results in many situations, however its functionality and

performance can be customized in numerous ways

through its Setup Mode better to suit specific

installations or personal preferences. You may chose to

adjust any or all of the setup parameters. To switch

Panorama into Setup Mode press and hold the remote

handset voice button for five seconds. Exit from Setup

Mode in the same manner.

Note: If no button is pressed for thirty seconds in Setup

Mode Panorama will return automatically to normal

mode.

In Setup Mode some Panorama handset buttons

change function as described below:

+ Selects the next setup menu top-level parameter

and adjusts parameter values once selected.

voice Saves parameter settings and jumps back to a

previous menu level.

mode Selects the next setup menu parameter.

– Selects the previous setup menu top-level

parameter and adjusts parameter values once

selected.

The remaining handset buttons are not operational in

Setup Mode. Figure 12 illustrates the Setup Mode

menus and the handset operations required to navigate

around them.

To begin Panorama setup press and hold the handset

voice button to enter Setup Mode. The first adjustment

menu is SOUND.

4.1 The Sound Menu

The SOUND menu enables adjustment of Panorama bass

and treble (TONE), bass equalization (BASS.EQ) and

subwoofer setup (SUB).

Note: The subwoofer menu will only be available if a

subwoofer is connected to Panorama.

To adjust the bass press mode from the SOUND menu

to select the TONE menu followed by mode again to

select BASS, and mode again to enter the adjustment

Figure 13 Panorama Room Presets

Preset

Preset 1Preset 2Preset 3

Setup Parameters

Distance 3.0m (9.8ft) 3.0m (9.8ft) 3.0m (9.8ft)

Offset Centre Centre Centre

Walls (Left) Medium Hard Soft

Walls (Right) Medium Hard Soft

BW Panorama Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info