744778
13
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
EN
13
1. Pack contents checklist (Fig. I)
1. Filter housing incl. 2 washers
2. Filter cartridge
3. Fitting and operating instructions (with
coloured hardness grade determination
table)
4. Water hardness test strip (stuck to the
tting and operating instructions, see
Section 8.1)
For reasons of hygiene, the lter cartridge
is packaged in protective foil and not yet
installed in the device.
2. General information
2.1 Explanation of symbols
I CAUTION!
… points out a potentially dangerous
situation. If it is not avoided, it could result
in personal injury and/or damage.
i
NOTE!
… highlights useful tips and recommen-
dations and information for efcient and
trouble-free operation.
2.2 Introduction
Thank you for purchasing Quick and Clean
from BWT water + more. This innovative
product is designed to save you time and
effort in keeping your bathroom sparkling
clean without the use of harsh or abrasive
chemicals. Please take the time to read this
guide carefully to familiarise yourself with the
units operation and to ensure your product is
installed correctly and safely.
The illustrations in these instructions are provi-
ded as a guide only and may differ from the
actual version of the lter system. They cannot
be used as a basis for legal claims.
Please keep this guide in a safe place for
future reference.
3. Safety information
Always comply with the safety instructions
and act cautiously to ensure safe and
reliable operation.
I CAUTION!
The BWT Quick & Clean lter system is
intended exclusively for connections to
ttings in the shower or bath.
The lter system is not suitable for the
production of drinking water, i.e. the
lter is not suitable for the treatment of
contaminated water.
Do not operate with hot water
(max. 50 °C).
Keep the spare parts, lling and
packaging material safe from children.
There is a danger of suffocation.
i
NOTE!
An adaptor may be necessary for
mounting to a shower or bath tap
tting. If necessary, please contact
info@quick-n-clean.com, specifying the
model and make of your tting.
Only clean the lter system with warm
soapy water. Do not use abrasive and
aggressive cleaning agents.
4. Parts and operating elements
(Fig. II)
1. Washer
2. Nut
3. Button
4. Filter housing
5. Filter cartridge
6. Filter base
7. Connection nut for the shower hose
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für BWT Quick and Clean wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info